Dongguan Action Composites is a source-reviewed supplier profile for carbon fiber products, with every search topic tied to company-published product or process evidence and separated from buyer-side verification requirements.
Dongguan Action Composites Co., Ltd. is a Dongguan, Guangdong developer and manufacturer of automotive carbon-fiber composite parts. The official China website dates the China operation to 2012 and describes the development, design and production of automotive CFRP components. It publishes carbon roll cages, stabilizer bars and links, full-carbon wheels, springs, mirror housings and Class-A interior and exterior parts. China Composites Expo's final 2026 Shenzhen exhibitor list names the same Dongguan legal entity and identifies automotive carbon-fiber composite components as its exhibit. This profile is limited to traceable China-site products and capabilities and does not automatically transfer another group facility, management certificate, customer, production volume, patent or award into a verified Dongguan supply scope.
The reviewed product and process scope makes this supplier relevant to buyer searches for carbon fiber products. These phrases describe products or processes supported by the cited public scope; they do not expand the supplier's catalog or replace technical qualification.
Is this your business?
Register or sign in to claim your company, update this public profile and respond to buyer inquiries.
This procurement profile is built for engineering and procurement teams comparing a finished FRP or composite component against a controlled drawing, service condition and inspection plan. It organizes Dongguan Action Composites Co., Ltd.'s published products, processes, certificate references and official sources around the primary topic “Dongguan Action Composites Automotive carbon fiber roll cages.” The objective is to help a buyer decide whether to open a controlled RFQ, not to turn a broad company catalog into an unsupported approval.
Dongguan Action Composites Co., Ltd. currently lists 8 product or service groups and 8 manufacturing or support capabilities in this reviewed record. The public scope indicates what to investigate, while the buyer remains responsible for drawings, design calculations, standards, current certificates, sample approval and order-specific commercial confirmation. Claims below are attributed to the attached source set unless GetFRP explicitly labels them as qualification guidance.
Action Composites is positioned for automotive OEM and series-production CFRP components, not standard carbon sheet, tube or generic sporting goods. Its official highlighted range includes Class-A mirror housings and trim, a carbon roll cage, stabilizer bars and links, full-carbon wheels or rims and carbon springs, together with development, blank production, finishing, painting and series-production support. An RFQ should begin with the vehicle program, part number and controlled drawing, then define interfaces, load spectrum, crash or safety function, stiffness, strength, fatigue, temperature, humidity, salt spray, stone impact, UV, chemicals, NVH, flammability, dimensions and Class-A appearance. The material specification should identify fiber grade and substitution rules, resin, prepreg or fabric, orientation, target fiber volume, cores or inserts, bonding and fastening, cure and post-processing. Structural and cosmetic parts need different acceptance plans. Development scope should allocate design responsibility, DFMEA and PFMEA, composite analysis model, ownership of molds and gauges, prototype phases, test plan, first article, PPAP or buyer-specific approval, engineering change, software and data confidentiality. The site shows autoclave equipment, radial braiding, one-shot hollow structures and Class-A surfaces, but the RFQ must confirm the actual factory, equipment, size envelope, capacity, automation, key-characteristic controls, nondestructive inspection, repair rules and traceability proposed for the part. Wheels, roll cages, springs and chassis links are safety-related. Obtain regulation, homologation, test and failure-mode evidence for the exact component, vehicle and market instead of treating awards or broad certification statements as production release. Cosmetic acceptance should cover color, weave, fiber distortion, print-through, pinholes, waviness, gloss, orange peel, coating thickness and master samples for restricted A-surfaces. Require material lots, cold-chain and shelf-life records, lay-up or braid record, cure trace, inspection, serialization, retention, rework and change notification. Separate development, molds, gauges, tests, prototypes, production, paint, packaging, service parts and support commercially, and confirm China contracting or export entity, IP, reserved capacity, MOQ, ramp-up and end-of-production duties. No complete current certificate document was reviewed, so the site's IATF, ISO and SA system statements are not entered as verified certifications.
No company-level certification is listed on this profile.
Evaluate Dongguan Action Composites Co., Ltd. as a potential composite product manufacturer for carbon fiber products, verify the public evidence and prepare a comparable RFQ.
Dongguan Action Composites Co., Ltd. includes this product in its published supply scope. Treat that listing as a starting point: request the current datasheet or drawing, material and construction, available grades or dimensions, guaranteed properties, production site, quotation revision and evidence that represents the exact item offered.
For Carbon fiber stabilizer bars, buyers should convert the catalog description into an acceptance specification. Confirm standard and custom options, raw-material system, critical tolerances, surface or finish, test basis, sample route, MOQ, lead time and packing. Any alternative proposed by Dongguan Action Composites Co., Ltd. should be identified explicitly rather than treated as automatically equivalent.
This product broadens the supplier's public portfolio, but GetFRP does not infer approval from a product name alone. Ask Dongguan Action Composites Co., Ltd. for the grade or model designation, manufacturing route, current technical file, production and test location, batch traceability and the limits that apply to published performance values.
Dongguan Action Composites Co., Ltd. publishes Automotive CFRP product co-development as part of its capability scope. Buyers should ask which site and equipment perform the work, the practical size or material limits, the normal control records and whether the proposed order uses the same route. Subcontracted stages should be visible in the quality plan.
The relevance of Composite structural and cosmetic design depends on the requested product and acceptance criteria. During qualification, request a process flow, critical control points, inspection or test method, operator or equipment qualification where applicable, nonconformance handling and a recent example that represents the offered production route.
For sourcing purposes, Bionic topology optimization and composite FEM (company claim) is a capability signal rather than independent verification. Confirm capacity, tooling or fixture availability, setup and changeover assumptions, lot definition, sample approval and traceability. The quotation should identify any limitation that could affect geometry, performance, appearance or delivery.
Buyers evaluating Carbon-fiber autoclave molding should connect the process claim to evidence: an equipment list, controlled procedure, representative report, production photograph or witnessed sample may each answer a different risk. Dongguan Action Composites Co., Ltd. should also explain how the result is checked before release and recorded for the shipment.
These are sourcing contexts suggested by the published product scope, not confirmed project references. Validate the exact application, design basis and evidence in the RFQ.
Dongguan Action Composites Co., Ltd.'s reinforcement range can be screened for laminating, pultrusion, winding, molding or conversion programs. Buyers should confirm grade, sizing, architecture, width, tex or areal weight, package, splice and moisture limits, then run a representative processing trial before approving the material for repeat production.
Dongguan Action Composites Co., Ltd.'s tooling scope can be considered for new or replacement production tools. Buyers should release controlled product and interface drawings, material and process assumptions, critical datums, tool material and treatment, heating or flow requirements, trial conditions, acceptance measurements, ownership, maintenance and protected transport.
Dongguan Action Composites Co., Ltd.'s product references indicate a possible fit for transport applications. Qualification should address part revision, material and process, appearance class, dimensional capability, inserts and secondary operations, validation plan, change control, annual volume, service-part obligations and packaging that prevents cosmetic or structural damage.
Dongguan Action Composites Co., Ltd.'s source record currently includes Official Action Composites China Website, Action Composites China Profile, Highlighted Automotive CFRP Products, Action Composites Official Contact Page. These links let a buyer distinguish company-published information from GetFRP's own qualification guidance and return to the original context when a claim changes.
No company-level certification is presently listed in the reviewed profile. That does not prove that no document exists, but it means the RFQ should ask for the quality-system certificate and every product-specific test or approval needed by the buyer rather than assuming a certification from market reputation.
GetFRP last recorded a public-source review date of 2026-08-25. Public websites and catalogs can change after review, so commercial decisions should use newly downloaded files and direct supplier confirmation. GetFRP's public or claimed status describes profile ownership and identity controls; it does not certify every product statement or predict order performance.
Official product catalogs, web directories and technical guides published by the supplier.
China entity, products, capabilities and contact entry point.
Open catalogChina history, development and production positioning and published processes.
Open catalogRoll cage, chassis links, wheels, springs and cosmetic parts.
Open catalogDongguan address, telephone and sales email.
Open catalogOrganizer source for the Action entity, booth and automotive CFRP exhibit.
Open catalog
Jiangsu Aosheng Composite Materials Technology Co., Ltd. is a Suzhou-based carbon-composite company whose current corporate website and 2026 China Composites Expo listing support carbon-fiber woven and hybrid fabrics, prepreg, wind-blade pultruded plate and composite application development. The official site also presents automotive, sports, hydrogen, aviation and overseas footprints under the Aosheng group. GetFRP therefore assigns measured-demand phrases such as carbon fiber fabric, carbon fiber plate, pultruded, resin infusion and vacuum infusion only where a published product or manufacturing route supports them. Fishing rods may be an end use of prepreg, but they are not listed here as an Aosheng finished product. Likewise, automotive parts, sports products and hydrogen cylinders are marked as group-sector inquiries rather than automatically attributed to the Jiangsu parent factory. Buyers must confirm the exact legal entity, production site and specification behind a quotation. Awards, customer relationships, capacity, CNAS, patent and standards-participation statements on the website remain company claims, not GetFRP verification.
Nanjing Hitech Composites Co., Ltd. publishes an integrated HICOMA and Lica offer spanning pultruded carbon- and glass-fiber profiles, high-performance reinforcement fabrics and structural adhesives. Its current official catalog explicitly lists carbon-fiber plate, rod, tube, channel, rebar and prestressed plate systems; fiberglass beams, channels, angles, tubes, plates, rebar and grating; carbon- and glass-fiber fabrics; and bonding products for wind blades, carbon plate and civil structures. The China Composites Expo directory independently supports the Nanjing exhibitor identity and its pultruded-composite and epoxy-adhesive scope. GetFRP therefore assigns only demand phrases supported by those actual products, including carbon-fiber products, plates, rods, tubes and fabrics, pultruded fiberglass profiles and fiberglass grating. An application, system or performance label is not treated as a substitute for the offered grade, section drawing, laminate architecture, adhesive TDS or project engineering.
Jiangsu Changhai Composite Materials Holding Co., Ltd. is a Changzhou supplier of glass-fiber reinforcement and thermoplastic composite materials. Its current official catalog and the 2026 China Composites Expo directory support roving, chopped strands, chopped strand mat, surface and continuous mat, woven roving, biaxial and stitched combinations, mesh, LFT reinforcement, CFRT tape and glass-reinforced thermoplastic panels. GetFRP assigns measured-demand phrases such as chopped strand mat, fiberglass cloth, fiberglass mat, fiberglass chopped strand mat and fiberglass panels only to these published products. The thermoplastic honeycomb offer is described as a core with continuous-glass-fiber-reinforced CFRT skins, not as a solid fiberglass panel or a claim that every honeycomb grade contains glass. Product-specific roving end uses do not mean Changhai manufactures the customer's finished pipe, SMC part or pultruded profile. The complete current logo was downloaded on 2026-08-26 from the exact CDN asset referenced by the official header, trimmed only to remove transparent canvas, and stored locally by GetFRP. Capacity, market-position and certification statements remain company claims pending certificate- and plant-level verification.