Dongguan Tstar Composites is a source-reviewed supplier profile for carbon fiber sheets, carbon fiber tube, and fiberglass rebar, with every search topic tied to company-published product or process evidence and separated from buyer-side verification requirements.
Dongguan Tstar Composites Co., Ltd. is a Dongguan, Guangdong manufacturer of carbon-fiber and fiberglass products. China Composites Expo lists the full Chinese entity and says it was established in 2012 with pultrusion, pull-braiding, roll wrapping, prepreg compression molding, SMC/BMC, coating and CNC operations. The current official site separately publishes carbon-fiber tube, rod, sheet and profile families; fiberglass tube, rod, flat-bar and profile families; and process directories for pultrusion, roll wrapping, compression molding and SMC/BMC/DMC, plus sports and outdoor products. Its fishing page specifically shows a telescopic fiberglass fishing product rather than a carbon-fiber fishing rod. GetFRP therefore injects only supported product keywords and does not infer an unlisted product from an adjacent category.
The reviewed product and process scope makes this supplier relevant to buyer searches for carbon fiber sheets, carbon fiber tube, fiberglass rebar, and fiberglass rod. These phrases describe products or processes supported by the cited public scope; they do not expand the supplier's catalog or replace technical qualification.
Is this your business?
Register or sign in to claim your company, update this public profile and respond to buyer inquiries.
This procurement profile is built for engineering and procurement teams comparing a finished FRP or composite component against a controlled drawing, service condition and inspection plan. It organizes Dongguan Tstar Composites Co., Ltd.'s published products, processes, certificate references and official sources around the primary topic “Dongguan Tstar Composites Carbon fiber tubes.” The objective is to help a buyer decide whether to open a controlled RFQ, not to turn a broad company catalog into an unsupported approval.
Dongguan Tstar Composites Co., Ltd. currently lists 8 product or service groups and 8 manufacturing or support capabilities in this reviewed record. The public scope indicates what to investigate, while the buyer remains responsible for drawings, design calculations, standards, current certificates, sample approval and order-specific commercial confirmation. Claims below are attributed to the attached source set unless GetFRP explicitly labels them as qualification guidance.
Tstar spans standard sections, custom profiles, roll-wrapped and pull-braided tubes, molded parts and sporting goods, so buyers should qualify each process family separately. A pultruded carbon or fiberglass tube, rod, flat bar, angle, channel, I-, T- or Z-section or rebar RFQ should provide the section drawing, length, straightness, twist, dimensional and hole tolerances, resin, reinforcement, veil or 3K cosmetic layer, target fiber volume, longitudinal and transverse properties, electrical, flame, weathering, chemical and temperature requirements. Roll-wrapped or pull-braided tubes also require round, square or tapered geometry; inside and outside diameter; wall; lay-up orientation or braid angle; seams and surface texture; end machining; concentricity and balance. A carbon-fiber sheet inquiry should lock thickness, size, lay-up, 0/90 or quasi-isotropic intent, gloss or matte face, flatness, holes and sealed edges instead of comparing only a generic 3K label. SMC, BMC or DMC grating, cable tray, meter box, louver, cooling-tower or custom molded part needs material grade, mold and ownership, inserts, shrinkage, surface class, color, flame, electrical and weathering tests, first article and recurring inspection. Sporting products must use product-specific drawings and performance criteria. The official site supports carbon paddles, baseball or softball bats and shin guards, plus fiberglass fishing products; the Fishing category must not be rewritten as a carbon-fiber fishing rod. Require current drawings, material or lay-up specification, TDS and SDS, lot COA fields, dimensional and cosmetic inspection, representative first article and test methods for the offered grade and construction. Samples should use the proposed production route and record material lot, tooling, cure, pulling speed or lay-up, secondary operations and packaging. For long profiles and tubes, confirm maximum shipping length, splice limits, end protection, bundles, crates or supports, container loading, deflection support and arrival straightness. Separate tooling, samples, recurring unit price, MOQ, lead time, CNC or coating, inspection, packing and Incoterm, and confirm contracting and export entity, English documents, change notification and nonconformance handling. No current certificate document with complete legal identity, number, scope, issuer and validity was reviewed, so none is recorded as verified.
No company-level certification is listed on this profile.
Evaluate Dongguan Tstar Composites Co., Ltd. as a potential composite product manufacturer for carbon fiber sheets, verify the public evidence and prepare a comparable RFQ.
Dongguan Tstar Composites Co., Ltd. includes this product in its published supply scope. Treat that listing as a starting point: request the current datasheet or drawing, material and construction, available grades or dimensions, guaranteed properties, production site, quotation revision and evidence that represents the exact item offered.
For Fiberglass FRP tubes, rods, flat bars and pultruded profiles, buyers should convert the catalog description into an acceptance specification. Confirm standard and custom options, raw-material system, critical tolerances, surface or finish, test basis, sample route, MOQ, lead time and packing. Any alternative proposed by Dongguan Tstar Composites Co., Ltd. should be identified explicitly rather than treated as automatically equivalent.
Dongguan Tstar Composites Co., Ltd. publishes Fiberglass and carbon-fiber pultrusion as part of its capability scope. Buyers should ask which site and equipment perform the work, the practical size or material limits, the normal control records and whether the proposed order uses the same route. Subcontracted stages should be visible in the quality plan.
The relevance of Continuous-fiber pull-braiding and over-braided tube forming depends on the requested product and acceptance criteria. During qualification, request a process flow, critical control points, inspection or test method, operator or equipment qualification where applicable, nonconformance handling and a recent example that represents the offered production route.
For sourcing purposes, Prepreg roll wrapping and tapered-tube rolling is a capability signal rather than independent verification. Confirm capacity, tooling or fixture availability, setup and changeover assumptions, lot definition, sample approval and traceability. The quotation should identify any limitation that could affect geometry, performance, appearance or delivery.
These are sourcing contexts suggested by the published product scope, not confirmed project references. Validate the exact application, design basis and evidence in the RFQ.
Dongguan Tstar Composites Co., Ltd.'s published scope creates a potential fit for window, door or building-envelope programs. Buyers should confirm the exact profile series, section drawing, glazing and hardware configuration, whole-assembly thermal basis, air and water performance, finish, fire claim and the certificate or report that represents the offered system.
Dongguan Tstar Composites Co., Ltd.'s listed grating or platform products may be relevant to industrial access systems. Qualification should identify molded or pultruded construction, resin, panel and mesh geometry, surface, support span, load and deflection limit, cut plan, clips, fire or smoke requirement and the test basis behind any published load table.
Dongguan Tstar Composites Co., Ltd.'s listed reinforcement products may be relevant to corrosion-sensitive concrete or civil works. Buyers should state fiber type, nominal area, guaranteed tensile property, modulus, bond surface, bend geometry, test method, design code, lot traceability and packaging. FRP reinforcement should not be specified or handled as if it were interchangeable with steel.
Dongguan Tstar Composites Co., Ltd.'s source record currently includes Official Tstar Website, Carbon Fiber Product Directory, Fiberglass Product Directory, Pultrusion Products and Sections. These links let a buyer distinguish company-published information from GetFRP's own qualification guidance and return to the original context when a claim changes.
No company-level certification is presently listed in the reviewed profile. That does not prove that no document exists, but it means the RFQ should ask for the quality-system certificate and every product-specific test or approval needed by the buyer rather than assuming a certification from market reputation.
GetFRP last recorded a public-source review date of 2026-08-25. Public websites and catalogs can change after review, so commercial decisions should use newly downloaded files and direct supplier confirmation. GetFRP's public or claimed status describes profile ownership and identity controls; it does not certify every product statement or predict order performance.
Official product catalogs, web directories and technical guides published by the supplier.
Current product, process, application and contact entry point.
Open catalogOfficial carbon-fiber tube, rod, sheet and profile families.
Open catalogOfficial fiberglass tube, rod, flat-bar and profile families.
Open catalogOfficial rod, tube, profile, rebar and pultrusion directory.
Open catalogOfficial roll-wrapped round and tapered tube entry point.
Open catalogPublished company and factory information.
Open catalogOrganizer source for the Tstar entity, processes and finished-product scope.
Open catalog
According to its official website, F1 Composites is FengDu New Material's international export company. It supplies pultruded FRP profiles, gratings, fiberglass window and door systems, and custom pultrusions for overseas projects, with English-language engineering, quality documentation, export coordination and international delivery support.
Nanjing Hitech Composites Co., Ltd. publishes an integrated HICOMA and Lica offer spanning pultruded carbon- and glass-fiber profiles, high-performance reinforcement fabrics and structural adhesives. Its current official catalog explicitly lists carbon-fiber plate, rod, tube, channel, rebar and prestressed plate systems; fiberglass beams, channels, angles, tubes, plates, rebar and grating; carbon- and glass-fiber fabrics; and bonding products for wind blades, carbon plate and civil structures. The China Composites Expo directory independently supports the Nanjing exhibitor identity and its pultruded-composite and epoxy-adhesive scope. GetFRP therefore assigns only demand phrases supported by those actual products, including carbon-fiber products, plates, rods, tubes and fabrics, pultruded fiberglass profiles and fiberglass grating. An application, system or performance label is not treated as a substitute for the offered grade, section drawing, laminate architecture, adhesive TDS or project engineering.
Nanjing Mingfeng Composite Materials Co., Ltd. says on its official website that it was founded in 2002 and manufactures pultruded and molded fiberglass products. The current catalog explicitly lists round and rectangular tube, rod, channel, I-beam, molded and pultruded grating, insulation ladders, tool handles, epoxy fiberglass rod, guardrail, flagpole, greenhouse support and other custom products. The China Composites Expo N directory also supports the exhibitor identity and its profile, tube, grating, ladder, handle, radome and molded-part scope. GetFRP maps fiberglass grating, pultruded fiberglass profiles and fiberglass-reinforced pipe demand only to those actual catalog items. Educational articles on the site discuss broader FRP applications such as tanks, cooling towers and flues; they are not treated as proof that Mingfeng currently manufactures every discussed product.