GPM Machinery (Shanghai) is presented as a source-reviewed supplier profile centered on Thermoplastic carbon-fiber UD-tape production lines, with company-published capability separated from buyer-side verification requirements.
GPM Machinery (Shanghai) Co., Ltd. is a plastic-extrusion and thermoplastic-composite equipment supplier in Jiading, Shanghai. Its current Chinese and English websites publish the matching GPM identity, Jiading address, telephone and company email. China Composites Expo lists GPM MACHINERY (SHANGHAI) CO., LTD. and highlights continuous-fiber reinforced thermoplastic production systems. The official thermoplastic-composite directory covers UD-tape or unidirectional-fabric lines for carbon, glass, aramid and UHMWPE fibers with PPS, PEEK, PA, PP and PE matrices, plus long-glass thermoplastic pellet lines, UD-tape slitters, double-belt presses and automotive-interior lamination equipment. GPM supplies machinery and engineering services. A line's ability to process carbon fiber, fiberglass or prepreg does not mean that GPM itself supplies those materials. GetFRP therefore assigns equipment, line and process language only, with no carbon-fiber-material, fiberglass-material or prepreg-supplier search phrases.
Is this your business?
Register or sign in to claim your company, update this public profile and respond to buyer inquiries.
This procurement profile is built for plant owners and process engineers comparing production scope, controls, commissioning responsibility and lifecycle support. It organizes GPM Machinery (Shanghai) Co., Ltd.'s published products, processes, certificate references and official sources around the primary topic “GPM Machinery (Shanghai) Thermoplastic carbon-fiber UD-tape production lines.” The objective is to help a buyer decide whether to open a controlled RFQ, not to turn a broad company catalog into an unsupported approval.
GPM Machinery (Shanghai) Co., Ltd. currently lists 10 product or service groups and 8 manufacturing or support capabilities in this reviewed record. The public scope indicates what to investigate, while the buyer remains responsible for drawings, design calculations, standards, current certificates, sample approval and order-specific commercial confirmation. Claims below are attributed to the attached source set unless GetFRP explicitly labels them as qualification guidance.
The official directory separates continuous-carbon thermoplastic tape into wet-powder, PA, PPS and PEEK configurations and also lists glass-fiber/PE, aramid/PE or PP, UHMWPE unidirectional fabric, CFRTP/GFRTP slitting, LFRT pellets and thermoplastic honeycomb lamination. An equipment RFQ should first identify fiber producer and grade, tow, sizing, incoming package and spread width; resin grade, melt flow, drying, processing temperature, degradation and volatiles; and target tape width, thickness, areal weight, fiber or resin content, voids, surface, edge, roll diameter, roll mass and takt. A high-temperature PEEK or PPS line needs separately controlled drying, inerting, melt residence, heating zones, roll-face temperature, cooling, exhaust, contact materials, thermal expansion, insulation and hot-work safety. Results from a PA or PP trial cannot be extrapolated. Define the supply boundary for creels, fiber spreading, preheat, impregnation, calendaring or consolidation, cooling, puller, in-line thickness or mass measurement, slitting, tension, web guiding, winding, edge recycling, compounding extruder, double-belt press, controls and data interfaces. Require a line trial with the buyer's representative fiber and resin, recording raw-material lots, drying, temperatures, pressure, speed, tension, energy, scrap, tape properties, endurance, roll change and cleaning. FAT and SAT should define capacity, yield, dimensional and resin-content statistics, void or wet-out acceptance, restart, recipe permissions, alarms, E-stops, interlocks, guards, exhaust, dust and static grounding. The delivery package should include layout, foundations, electrical, compressed air, cooling water, thermal-oil or other heating, exhaust, network, BOM, drawings, PLC and HMI source and backups, software licenses, Chinese and English manuals, maintenance, consumables, training and warranty. The website exposes a certificate entry, but this review did not align certificate number, standard revision, scope, address and validity, so no certification is recorded as verified. Separate machine, dies or rolls, installation, trial materials, packing, sea freight, field service and overseas spares, and confirm the contracting, invoicing, payee and export entity.
No company-level certification is listed on this profile.
Evaluate GPM Machinery (Shanghai) Co., Ltd. as a potential composite manufacturing equipment supplier for Thermoplastic carbon-fiber UD-tape production lines, verify the public evidence and prepare a comparable RFQ.
GPM Machinery (Shanghai) Co., Ltd. includes this product in its published supply scope. Treat that listing as a starting point: request the current datasheet or drawing, material and construction, available grades or dimensions, guaranteed properties, production site, quotation revision and evidence that represents the exact item offered.
For PPS, PEEK and PA carbon-fiber thermoplastic prepreg-tape lines, buyers should convert the catalog description into an acceptance specification. Confirm standard and custom options, raw-material system, critical tolerances, surface or finish, test basis, sample route, MOQ, lead time and packing. Any alternative proposed by GPM Machinery (Shanghai) Co., Ltd. should be identified explicitly rather than treated as automatically equivalent.
This product broadens the supplier's public portfolio, but GetFRP does not infer approval from a product name alone. Ask GPM Machinery (Shanghai) Co., Ltd. for the grade or model designation, manufacturing route, current technical file, production and test location, batch traceability and the limits that apply to published performance values.
A useful RFQ for Continuous-glass-fiber reinforced PE UD-tape production lines should describe the buyer's application without disclosing unnecessary proprietary detail, then state the measurable product requirements. Compare GPM Machinery (Shanghai) Co., Ltd.'s response against the same dimensions, quantity, inspection, documentation, Incoterm and delivery assumptions used for every shortlisted supplier.
GPM Machinery (Shanghai) Co., Ltd. publishes Melt-impregnation and wet-powder thermoplastic line integration as part of its capability scope. Buyers should ask which site and equipment perform the work, the practical size or material limits, the normal control records and whether the proposed order uses the same route. Subcontracted stages should be visible in the quality plan.
The relevance of Continuous-fiber unwinding, spreading, impregnation, consolidation and winding depends on the requested product and acceptance criteria. During qualification, request a process flow, critical control points, inspection or test method, operator or equipment qualification where applicable, nonconformance handling and a recent example that represents the offered production route.
For sourcing purposes, UD-tape width, areal-weight and resin-content process development is a capability signal rather than independent verification. Confirm capacity, tooling or fixture availability, setup and changeover assumptions, lot definition, sample approval and traceability. The quotation should identify any limitation that could affect geometry, performance, appearance or delivery.
Buyers evaluating In-line unidirectional-tape slitting and winding should connect the process claim to evidence: an equipment list, controlled procedure, representative report, production photograph or witnessed sample may each answer a different risk. GPM Machinery (Shanghai) Co., Ltd. should also explain how the result is checked before release and recorded for the shipment.
These are sourcing contexts suggested by the published product scope, not confirmed project references. Validate the exact application, design basis and evidence in the RFQ.
GPM Machinery (Shanghai) Co., Ltd.: The listed equipment can form part of a new production line, but machine selection should start from the product envelope, material system, throughput, utility and quality requirements. Ask the supplier to define every included station and the responsibility boundary for tooling, controls, guarding and downstream handling.
GPM Machinery (Shanghai) Co., Ltd.: For an expansion project, the buyer should document interfaces with existing creels, molds, heaters, cutters, extraction, material handling and plant controls. A factory acceptance test should use representative materials and demonstrate the agreed output and quality measures rather than only showing that individual motors run.
GPM Machinery (Shanghai) Co., Ltd.: Equipment value depends on installation, training, spares and troubleshooting after shipment. Confirm remote and on-site support, language, response time, software access, electrical documentation, consumables and the list of critical components that can be sourced in the destination market.
GPM Machinery (Shanghai) Co., Ltd.'s source record currently includes Official GPM Website, Thermoplastic Composite Machinery, GPM Product Center, GPM Company Profile. These links let a buyer distinguish company-published information from GetFRP's own qualification guidance and return to the original context when a claim changes.
No company-level certification is presently listed in the reviewed profile. That does not prove that no document exists, but it means the RFQ should ask for the quality-system certificate and every product-specific test or approval needed by the buyer rather than assuming a certification from market reputation.
GetFRP last recorded a public-source review date of 2026-08-25. Public websites and catalogs can change after review, so commercial decisions should use newly downloaded files and direct supplier confirmation. GetFRP's public or claimed status describes profile ownership and identity controls; it does not certify every product statement or predict order performance.
Official product catalogs, web directories and technical guides published by the supplier.
Official equipment, company and contact entry.
Open catalogOfficial UD-tape, LFRT, slitting and sandwich-lamination equipment.
Open catalogAll machinery categories and individual products.
Open catalogOfficial Shanghai entity and equipment-business profile.
Open catalogPublished Jiading address, telephone and email.
Open catalogOrganizer source for the Shanghai exhibitor and composite-equipment scope.
Open catalog
Nanjing Haoli Hydraulic Equipment Co., Ltd. states that it was founded in 1999 and entered the composites field in 2000. Its current official catalog covers hydraulic, servo-hydraulic and caterpillar-puller pultrusion machines plus pultrusion-winding, resin-injection, automatic cut-off, mat-cutting, take-up, braided-pultrusion cable-conduit and die equipment. The China Composites Expo N directory supports the exhibitor identity and FRP pultrusion-equipment scope. Haoli sells the machinery, tooling and process support used to manufacture composite profiles. The website's statement that a machine can pull glass- or carbon-fiber sections describes compatible workpieces; it is not evidence that Haoli supplies carbon fiber, fiberglass, pultruded profiles, conduits or other finished composites. GetFRP therefore does not assign material or finished-product demand keywords to this equipment profile.
Nabertherm Ltd. (Shanghai), identified in Chinese exhibition material as Nabertherm's Shanghai industrial-furnace company, is the China sales-company entry published on the current Nabertherm website. The reviewed official navigation covers air-circulation and drying ovens, radiation-heated chamber furnaces, high-temperature solutions, protective-gas and vacuum systems, laboratory muffle and tube furnaces, debinding and sintering systems, melting and holding furnaces, custom furnace engineering and process-control documentation. The China Composites Expo N directory independently supports the Shanghai exhibitor identity. This is an equipment profile: carbon fiber, fiberglass, resin, ceramic, metal powder or any other workpiece processed in a furnace is not a material manufactured by Nabertherm. The exhibition category also is not evidence that the Shanghai entity offers composite-curing autoclaves, so GetFRP does not publish an autoclave product or inject material-product keywords.
Lianyungang Weide Composite Materials Facilities Co., Ltd. says on its current official website that it was established in 2001 and develops and manufactures composite-production equipment. The published range covers continuous-filament-winding FRP pipe lines, high-pressure hydrogen-cylinder winding lines, four-axis and horizontal winding machines, high-pressure epoxy-pipe lines, centrifugal-casting GRP pipe lines, lighting-pole lines and supporting manipulators, curing ovens, resin-supply, intelligent feeding, conveying, joint-making and quality-assurance systems. China Composites Expo's L directory lists the matching exhibitor. Weide sells the machinery used to make pipes, cylinders and poles; those outputs are not presented as Weide-manufactured FRP or carbon-fiber products. GetFRP therefore excludes reinforcement, FRP-pipe and finished-cylinder supplier keywords. Capacity, performance, import-substitution, service-life and mechanical-property statements are supplier claims that must be validated against the quoted configuration, representative trials, FAT, SAT and contractual acceptance records.