Hebei Tengjun FRP is a source-reviewed supplier profile for fiberglass sheets, fiberglass rebar, and fiberglass grating, with every search topic tied to company-published product or process evidence and separated from buyer-side verification requirements.
Hebei Tengjun FRP Co., Ltd.'s official English website describes an integrated FRP business covering product development, design, manufacturing, processing and sales from Zaoqiang County in Hengshui, Hebei. Its current directory spans FRP grating, flat sheet, cable tray, storage tanks, pultruded profiles, manhole covers, marker posts, water tanks, pipes, SMC products, cooling towers and fiberglass rebar. The company states that selected products reach more than 60 countries and regions; this export-market statement is company-published and has not been independently verified by GetFRP.
The reviewed product and process scope makes this supplier relevant to buyer searches for fiberglass sheets, fiberglass rebar, fiberglass grating, and pultruded. These phrases describe products or processes supported by the cited public scope; they do not expand the supplier's catalog or replace technical qualification.
Is this your business?
Register or sign in to claim your company, update this public profile and respond to buyer inquiries.
This procurement profile is built for engineering and procurement teams comparing a finished FRP or composite component against a controlled drawing, service condition and inspection plan. It organizes Hebei Tengjun FRP Co., Ltd.'s published products, processes, certificate references and official sources around the primary topic “Hebei Tengjun FRP FRP Grating.” The objective is to help a buyer decide whether to open a controlled RFQ, not to turn a broad company catalog into an unsupported approval.
Hebei Tengjun FRP Co., Ltd. currently lists 6 product or service groups and 6 manufacturing or support capabilities in this reviewed record. The public scope indicates what to investigate, while the buyer remains responsible for drawings, design calculations, standards, current certificates, sample approval and order-specific commercial confirmation. Claims below are attributed to the attached source set unless GetFRP explicitly labels them as qualification guidance.
Tengjun's official equipment page states that the factory operates 21 large computer-controlled FRP winding lines, 20 pultrusion units, 200 grating molds, and 1,590 sets of FRP production equipment and molds in total. Product pages also publish pultrusion, filament winding, resin-cast molding, SMC, hand lay-up and spray-up capabilities. These counts are company-published and should be confirmed through a current factory audit, equipment register and capacity records. For a specific project, buyers should also validate the resin system, glass reinforcement, fire and weathering performance, structural load tables, dimensional tolerances, test standards, current certificates, tooling charges, MOQ, lead time, export packing and batch traceability.
No company-level certification is listed on this profile.
Evaluate Hebei Tengjun FRP Co., Ltd. as a potential composite product manufacturer for fiberglass sheets, verify the public evidence and prepare a comparable RFQ.
Hebei Tengjun FRP Co., Ltd. includes this product in its published supply scope. Treat that listing as a starting point: request the current datasheet or drawing, material and construction, available grades or dimensions, guaranteed properties, production site, quotation revision and evidence that represents the exact item offered.
For Pultruded FRP structural profiles, custom sections, ladders and rails, buyers should convert the catalog description into an acceptance specification. Confirm standard and custom options, raw-material system, critical tolerances, surface or finish, test basis, sample route, MOQ, lead time and packing. Any alternative proposed by Hebei Tengjun FRP Co., Ltd. should be identified explicitly rather than treated as automatically equivalent.
This product broadens the supplier's public portfolio, but GetFRP does not infer approval from a product name alone. Ask Hebei Tengjun FRP Co., Ltd. for the grade or model designation, manufacturing route, current technical file, production and test location, batch traceability and the limits that apply to published performance values.
A useful RFQ for FRP cable tray, flat sheet, manhole covers and marker posts should describe the buyer's application without disclosing unnecessary proprietary detail, then state the measurable product requirements. Compare Hebei Tengjun FRP Co., Ltd.'s response against the same dimensions, quantity, inspection, documentation, Incoterm and delivery assumptions used for every shortlisted supplier.
Hebei Tengjun FRP Co., Ltd. publishes Continuous pultrusion as part of its capability scope. Buyers should ask which site and equipment perform the work, the practical size or material limits, the normal control records and whether the proposed order uses the same route. Subcontracted stages should be visible in the quality plan.
The relevance of Computer-controlled filament winding depends on the requested product and acceptance criteria. During qualification, request a process flow, critical control points, inspection or test method, operator or equipment qualification where applicable, nonconformance handling and a recent example that represents the offered production route.
For sourcing purposes, Resin-cast molded grating is a capability signal rather than independent verification. Confirm capacity, tooling or fixture availability, setup and changeover assumptions, lot definition, sample approval and traceability. The quotation should identify any limitation that could affect geometry, performance, appearance or delivery.
Buyers evaluating SMC compression molding should connect the process claim to evidence: an equipment list, controlled procedure, representative report, production photograph or witnessed sample may each answer a different risk. Hebei Tengjun FRP Co., Ltd. should also explain how the result is checked before release and recorded for the shipment.
These are sourcing contexts suggested by the published product scope, not confirmed project references. Validate the exact application, design basis and evidence in the RFQ.
Hebei Tengjun FRP Co., Ltd.'s listed grating or platform products may be relevant to industrial access systems. Qualification should identify molded or pultruded construction, resin, panel and mesh geometry, surface, support span, load and deflection limit, cut plan, clips, fire or smoke requirement and the test basis behind any published load table.
Hebei Tengjun FRP Co., Ltd.'s public scope suggests a potential route for piping, tanks or corrosion-resistant process equipment. The RFQ should define service chemistry, temperature, pressure or stiffness class, liner, structural wall, joints, supports, nozzles, inspection and transport. Project-specific design and evidence remain necessary before the supplier can be treated as a fit.
Hebei Tengjun FRP Co., Ltd.'s listed reinforcement products may be relevant to corrosion-sensitive concrete or civil works. Buyers should state fiber type, nominal area, guaranteed tensile property, modulus, bond surface, bend geometry, test method, design code, lot traceability and packaging. FRP reinforcement should not be specified or handled as if it were interchangeable with steel.
Hebei Tengjun FRP Co., Ltd.'s source record currently includes Hebei Tengjun FRP Official Website, Tengjun Company Profile, Tengjun FRP Product Directory, Pultruded FRP Profiles. These links let a buyer distinguish company-published information from GetFRP's own qualification guidance and return to the original context when a claim changes.
No company-level certification is presently listed in the reviewed profile. That does not prove that no document exists, but it means the RFQ should ask for the quality-system certificate and every product-specific test or approval needed by the buyer rather than assuming a certification from market reputation.
GetFRP last recorded a public-source review date of 2026-08-05. Public websites and catalogs can change after review, so commercial decisions should use newly downloaded files and direct supplier confirmation. GetFRP's public or claimed status describes profile ownership and identity controls; it does not certify every product statement or predict order performance.
Official product catalogs, web directories and technical guides published by the supplier.
Official overview of the company, product categories, published manufacturing capabilities, export contacts and inquiry channel.
Open catalogOfficial description of the business scope, location, operating approach and product portfolio.
Open catalogOfficial directory for grating, profiles, tanks, cable tray, pipes, SMC products and other FRP products.
Open catalogOfficial overview of the pultrusion process, profile shapes, published properties and application sectors.
Open catalogCompany-published inventory of winding lines, pultrusion equipment, grating molds and other production assets.
Open catalogCompany-published overview of exported product groups and destination markets.
Open catalogOfficial Zaoqiang address, telephone, email and website inquiry form.
Open catalog
According to its official website, F1 Composites is FengDu New Material's international export company. It supplies pultruded FRP profiles, gratings, fiberglass window and door systems, and custom pultrusions for overseas projects, with English-language engineering, quality documentation, export coordination and international delivery support.
Nanjing Hitech Composites Co., Ltd. publishes an integrated HICOMA and Lica offer spanning pultruded carbon- and glass-fiber profiles, high-performance reinforcement fabrics and structural adhesives. Its current official catalog explicitly lists carbon-fiber plate, rod, tube, channel, rebar and prestressed plate systems; fiberglass beams, channels, angles, tubes, plates, rebar and grating; carbon- and glass-fiber fabrics; and bonding products for wind blades, carbon plate and civil structures. The China Composites Expo directory independently supports the Nanjing exhibitor identity and its pultruded-composite and epoxy-adhesive scope. GetFRP therefore assigns only demand phrases supported by those actual products, including carbon-fiber products, plates, rods, tubes and fabrics, pultruded fiberglass profiles and fiberglass grating. An application, system or performance label is not treated as a substitute for the offered grade, section drawing, laminate architecture, adhesive TDS or project engineering.
Nanjing Mingfeng Composite Materials Co., Ltd. says on its official website that it was founded in 2002 and manufactures pultruded and molded fiberglass products. The current catalog explicitly lists round and rectangular tube, rod, channel, I-beam, molded and pultruded grating, insulation ladders, tool handles, epoxy fiberglass rod, guardrail, flagpole, greenhouse support and other custom products. The China Composites Expo N directory also supports the exhibitor identity and its profile, tube, grating, ladder, handle, radome and molded-part scope. GetFRP maps fiberglass grating, pultruded fiberglass profiles and fiberglass-reinforced pipe demand only to those actual catalog items. Educational articles on the site discuss broader FRP applications such as tanks, cooling towers and flues; they are not treated as proof that Mingfeng currently manufactures every discussed product.