Hebei Weitong FRP is presented as a source-reviewed supplier profile centered on Continuous-Wound GRP Pipe, with company-published capability separated from buyer-side verification requirements.
Hebei Weitong FRP Co., Ltd. is based in Jizhou District, Hengshui, Hebei. Its official English website states that the company was established on April 30, 2015 and operates on more than 20,000 m², including approximately 11,000 m² of production workshops, with research, design and manufacturing functions. The published range covers FRP pipe, tanks, towers and flues, fittings, grating and pultruded profiles, plus FRP production equipment, molds and raw materials. Its scale, staffing, capacity, patent, customer and export statements are company-published; buyers should independently confirm them through the business license, factory audit, order references and traceable quality records.
Is this your business?
Register or sign in to claim your company, update this public profile and respond to buyer inquiries.
This procurement profile is built for engineering and procurement teams comparing a finished FRP or composite component against a controlled drawing, service condition and inspection plan. It organizes Hebei Weitong FRP Co., Ltd.'s published products, processes, certificate references and official sources around the primary topic “Hebei Weitong FRP Continuous-Wound GRP Pipe.” The objective is to help a buyer decide whether to open a controlled RFQ, not to turn a broad company catalog into an unsupported approval.
Hebei Weitong FRP Co., Ltd. currently lists 6 product or service groups and 6 manufacturing or support capabilities in this reviewed record. The public scope indicates what to investigate, while the buyer remains responsible for drawings, design calculations, standards, current certificates, sample approval and order-specific commercial confirmation. Claims below are attributed to the attached source set unless GetFRP explicitly labels them as qualification guidance.
Weitong's website publishes FRP pipe from DN15 to DN4000, tanks below DN23000, towers, flues, grating, profiles, fittings and integrated pump stations, together with pipe-and-tank production equipment, molds, reinforcement, resin and additives. It also shows a pressure-test platform, 45-ton pultrusion equipment and a BPO curing oven, and advertises design, installation guidance and after-sales support. Most product pages do not provide a downloadable project-level TDS, design calculation, laminate schedule, inspection-and-test plan, MOQ or lead time. A pipe RFQ should define the medium and concentration, temperature, design pressure or vacuum, stiffness, liner and structural laminate, diameter, joints and supports; tank and tower RFQs should add volume, geometry, wind and seismic loads, nozzle schedule and site conditions. Buyers should validate the design code, resin and reinforcement, corrosion allowance, laminate procedure, raw-material batches, process witness points, dimensional and pressure tests, third-party reports, packaging, warranty and actual manufacturing site, and clarify whether listed equipment and raw materials are manufactured or sourced by the supplier.
Evaluate Hebei Weitong FRP Co., Ltd. as a potential composite product manufacturer for Continuous-wound, sand-filled, circulation-water, process and epoxy-pressure FRP pipe, verify the public evidence and prepare a comparable RFQ.
Hebei Weitong FRP Co., Ltd. includes this product in its published supply scope. Treat that listing as a starting point: request the current datasheet or drawing, material and construction, available grades or dimensions, guaranteed properties, production site, quotation revision and evidence that represents the exact item offered.
For Large field-wound, horizontal, vertical and pressure FRP storage tanks, buyers should convert the catalog description into an acceptance specification. Confirm standard and custom options, raw-material system, critical tolerances, surface or finish, test basis, sample route, MOQ, lead time and packing. Any alternative proposed by Hebei Weitong FRP Co., Ltd. should be identified explicitly rather than treated as automatically equivalent.
This product broadens the supplier's public portfolio, but GetFRP does not infer approval from a product name alone. Ask Hebei Weitong FRP Co., Ltd. for the grade or model designation, manufacturing route, current technical file, production and test location, batch traceability and the limits that apply to published performance values.
A useful RFQ for FRP flanges, elbows, tees, crosses, reducers and other pipe fittings should describe the buyer's application without disclosing unnecessary proprietary detail, then state the measurable product requirements. Compare Hebei Weitong FRP Co., Ltd.'s response against the same dimensions, quantity, inspection, documentation, Incoterm and delivery assumptions used for every shortlisted supplier.
Hebei Weitong FRP Co., Ltd. publishes Filament winding for FRP pipe and large tanks as part of its capability scope. Buyers should ask which site and equipment perform the work, the practical size or material limits, the normal control records and whether the proposed order uses the same route. Subcontracted stages should be visible in the quality plan.
The relevance of Hand lay-up for fittings, towers, ducts and special-shaped parts depends on the requested product and acceptance criteria. During qualification, request a process flow, critical control points, inspection or test method, operator or equipment qualification where applicable, nonconformance handling and a recent example that represents the offered production route.
For sourcing purposes, Pultrusion of FRP angles, channels and other profiles is a capability signal rather than independent verification. Confirm capacity, tooling or fixture availability, setup and changeover assumptions, lot definition, sample approval and traceability. The quotation should identify any limitation that could affect geometry, performance, appearance or delivery.
Buyers evaluating Engineering design and dimensional customization for pipe, tanks and process equipment should connect the process claim to evidence: an equipment list, controlled procedure, representative report, production photograph or witnessed sample may each answer a different risk. Hebei Weitong FRP Co., Ltd. should also explain how the result is checked before release and recorded for the shipment.
These are sourcing contexts suggested by the published product scope, not confirmed project references. Validate the exact application, design basis and evidence in the RFQ.
Hebei Weitong FRP Co., Ltd.'s listed grating or platform products may be relevant to industrial access systems. Qualification should identify molded or pultruded construction, resin, panel and mesh geometry, surface, support span, load and deflection limit, cut plan, clips, fire or smoke requirement and the test basis behind any published load table.
Hebei Weitong FRP Co., Ltd.'s public scope suggests a potential route for piping, tanks or corrosion-resistant process equipment. The RFQ should define service chemistry, temperature, pressure or stiffness class, liner, structural wall, joints, supports, nozzles, inspection and transport. Project-specific design and evidence remain necessary before the supplier can be treated as a fit.
Hebei Weitong FRP Co., Ltd.'s reinforcement range can be screened for laminating, pultrusion, winding, molding or conversion programs. Buyers should confirm grade, sizing, architecture, width, tex or areal weight, package, splice and moisture limits, then run a representative processing trial before approving the material for repeat production.
Hebei Weitong FRP Co., Ltd.'s source record currently includes Weitong FRP Official Website, Weitong Company, Factory & Equipment Profile, Weitong Product Directory, Weitong FRP Pipe Directory. These links let a buyer distinguish company-published information from GetFRP's own qualification guidance and return to the original context when a claim changes.
The profile lists 3 company-published certification or test references. A listing is not the same as validation: request the complete current document, issuer, legal holder, production site, product and grade scope, standard edition, report specimen and validity date before citing it in a project or purchase order.
GetFRP last recorded a public-source review date of 2026-08-06. Public websites and catalogs can change after review, so commercial decisions should use newly downloaded files and direct supplier confirmation. GetFRP's public or claimed status describes profile ownership and identity controls; it does not certify every product statement or predict order performance.
F1 Composite is the international composites brand of Chongqing Yaoyi New Material Technology Co., Ltd. It supplies pultruded FRP profiles, gratings, fiberglass window and door systems, and custom pultrusions for overseas projects, with English-language engineering, contracting, quality documentation, export paperwork and international delivery support.
Chongqing Dujiang Composites Co., Ltd. states that the current company name was adopted in 2002 and traces its fiberglass and FRP operating history to 1980. Its published catalog spans fiberglass reinforcements, thermoset resins, FRP profiles, carbon- and aramid-fiber materials, and related auxiliaries. The company reports 289 employees, approximately 50,000 m² of plant space, one-stop sourcing and OEM/ODM services. Its official sites publish a Yubei office address and a separate Beibei production address; buyers should verify the contracting entity, actual production site, product origin and quality-responsibility chain through the business license, factory audit and order-specific documents.
SPARE's Chinese website presents the business as Nanjing Spare New Materials Co., Ltd., while its official English export site operates under the Nanjing Spare Composites brand and names Nanjing Spare Composites Yizheng Co., Ltd. in the site footer. The company's published history says Nanjing Spare was founded in May 1995 and the Yizheng company was established in 2011. Its public product scope centers on pultruded glass-fiber composite profiles, gratings, bridge and infrastructure components, with custom development, machining, testing and installation support.
Official product catalogs, web directories and technical guides published by the supplier.
Official overview of the company, principal products, applications, projects and export contacts.
Open catalogCompany-published history, site scale, equipment, R&D, patent and management-system statements.
Open catalogOfficial directory for pipe, tanks, towers, fittings, profiles, equipment, molds and raw materials.
Open catalogOfficial directory for continuous-wound, sand-filled, circulation, process, duct and epoxy-pressure pipe.
Open catalogOfficial directory for large field-wound, horizontal, vertical and pressure tanks, scrubbers, concentration towers and pump stations.
Open catalogOfficial directory for flanges, elbows, tees, reducers, cable tray, angles, channels and grating.
Open catalogCompany-published design, manufacturing, installation-guidance and after-sales service scope.
Open catalogOfficial Jizhou address, telephone, email, WhatsApp and Egypt branch information.
Open catalog