HEDRICH Xiamen Vacuum Equipment Manufacturing is presented as a source-reviewed supplier profile centered on Vacuum resin casting equipment, with company-published capability separated from buyer-side verification requirements.
HEDRICH Xiamen Vacuum Equipment Manufacturing Co., Ltd. is identified by HEDRICH's official China page as the German group's wholly owned Xiamen subsidiary. The page states a local presence since 1996, a 6,000-square-meter site opened in 2000, and publishes the Yangtai Road address, telephone and company email. China Composites Expo lists the matching entity for vacuum mixing, metering, casting, potting, impregnation and related equipment. HEDRICH's current navigation covers vacuum resin casting, APG, shot dosing, vacuum infusion, VPI, oil-paper drying, clamping systems, molds, liquid-silicone mixing and vacuum pumping. GetFRP classifies the company as a composite and electrical-insulation production-equipment supplier; no carbon-fiber or fiberglass material traffic phrase is injected because machinery is not reinforcing-fiber stock. Group-developed technologies are shown as HEDRICH scope, while the RFQ must confirm which modules are assembled, imported, commissioned and warranted by the Xiamen legal entity.
Is this your business?
Register or sign in to claim your company, update this public profile and respond to buyer inquiries.
This procurement profile is built for plant owners and process engineers comparing production scope, controls, commissioning responsibility and lifecycle support. It organizes HEDRICH Xiamen Vacuum Equipment Manufacturing Co., Ltd.'s published products, processes, certificate references and official sources around the primary topic “HEDRICH Xiamen Vacuum Equipment Manufacturing Vacuum resin casting equipment.” The objective is to help a buyer decide whether to open a controlled RFQ, not to turn a broad company catalog into an unsupported approval.
HEDRICH Xiamen Vacuum Equipment Manufacturing Co., Ltd. currently lists 10 product or service groups and 10 manufacturing or support capabilities in this reviewed record. The public scope indicates what to investigate, while the buyer remains responsible for drawings, design calculations, standards, current certificates, sample approval and order-specific commercial confirmation. Claims below are attributed to the attached source set unless GetFRP explicitly labels them as qualification guidance.
A vacuum casting, APG, potting, infusion or VPI project must be defined by the part, resin system, cycle and acceptance plan, not by the machine label alone. The RFQ should provide part dimensions and mass, annual volume, mold count, epoxy, polyurethane or silicone components, filler, viscosity, mix ratio, working life, degassing target, casting temperature, vacuum, pressure, heating or cooling, cure cycle, cleaning method, changeover frequency and explosion-protection or environmental requirements. A mixing and dosing system needs pump type, flow and accuracy, dynamic or static mixing, tanks, agitation, heating, filtration, vacuum, piping dead volume, weighing or flow feedback, recipe control, data logging, alarms and traceability. Define ultimate pressure, pumping speed, leak rate, load curve, traps or filtration, pump-fluid management and redundancy for the vacuum package. APG clamping and molds additionally require clamp force, daylight, heating zones, injection interface, demolding, inserts, automation, safety interlocks and tooling responsibility. VPI and oil-paper drying systems require vessel envelope, temperature uniformity, solvent or oil handling, pressure rating and applicable vessel rules. Require a process flow, P&ID, electrical drawings, BOM, software backup, interface list, FAT and SAT, a trial with representative material, training, spares, remote support, warranty, installation boundary and utility schedule. The contract should state how Xiamen and German or other HEDRICH sites divide design, fabrication, import, commissioning and after-sales responsibility. The official page proves a Xiamen operation but not that every global model is wholly manufactured there. No source certificate aligning the Xiamen legal entity, address, scope, number and validity was obtained, so certifications and supported standards remain empty.
No company-level certification is listed on this profile.
Evaluate HEDRICH Xiamen Vacuum Equipment Manufacturing Co., Ltd. as a potential composite manufacturing equipment supplier for Vacuum resin casting equipment, verify the public evidence and prepare a comparable RFQ.
HEDRICH Xiamen Vacuum Equipment Manufacturing Co., Ltd. includes this product in its published supply scope. Treat that listing as a starting point: request the current datasheet or drawing, material and construction, available grades or dimensions, guaranteed properties, production site, quotation revision and evidence that represents the exact item offered.
For APG vacuum pressure gelation equipment, buyers should convert the catalog description into an acceptance specification. Confirm standard and custom options, raw-material system, critical tolerances, surface or finish, test basis, sample route, MOQ, lead time and packing. Any alternative proposed by HEDRICH Xiamen Vacuum Equipment Manufacturing Co., Ltd. should be identified explicitly rather than treated as automatically equivalent.
This product broadens the supplier's public portfolio, but GetFRP does not infer approval from a product name alone. Ask HEDRICH Xiamen Vacuum Equipment Manufacturing Co., Ltd. for the grade or model designation, manufacturing route, current technical file, production and test location, batch traceability and the limits that apply to published performance values.
A useful RFQ for Vacuum infusion equipment should describe the buyer's application without disclosing unnecessary proprietary detail, then state the measurable product requirements. Compare HEDRICH Xiamen Vacuum Equipment Manufacturing Co., Ltd.'s response against the same dimensions, quantity, inspection, documentation, Incoterm and delivery assumptions used for every shortlisted supplier.
HEDRICH Xiamen Vacuum Equipment Manufacturing Co., Ltd. publishes Resin storage, conditioning, degassing and temperature control as part of its capability scope. Buyers should ask which site and equipment perform the work, the practical size or material limits, the normal control records and whether the proposed order uses the same route. Subcontracted stages should be visible in the quality plan.
The relevance of Two-component resin mixing, metering and shot dosing depends on the requested product and acceptance criteria. During qualification, request a process flow, critical control points, inspection or test method, operator or equipment qualification where applicable, nonconformance handling and a recent example that represents the offered production route.
For sourcing purposes, Vacuum resin casting and insulation-part cure is a capability signal rather than independent verification. Confirm capacity, tooling or fixture availability, setup and changeover assumptions, lot definition, sample approval and traceability. The quotation should identify any limitation that could affect geometry, performance, appearance or delivery.
Buyers evaluating Automatic pressure gelation (APG) molding should connect the process claim to evidence: an equipment list, controlled procedure, representative report, production photograph or witnessed sample may each answer a different risk. HEDRICH Xiamen Vacuum Equipment Manufacturing Co., Ltd. should also explain how the result is checked before release and recorded for the shipment.
These are sourcing contexts suggested by the published product scope, not confirmed project references. Validate the exact application, design basis and evidence in the RFQ.
HEDRICH Xiamen Vacuum Equipment Manufacturing Co., Ltd.: The listed equipment can form part of a new production line, but machine selection should start from the product envelope, material system, throughput, utility and quality requirements. Ask the supplier to define every included station and the responsibility boundary for tooling, controls, guarding and downstream handling.
HEDRICH Xiamen Vacuum Equipment Manufacturing Co., Ltd.: For an expansion project, the buyer should document interfaces with existing creels, molds, heaters, cutters, extraction, material handling and plant controls. A factory acceptance test should use representative materials and demonstrate the agreed output and quality measures rather than only showing that individual motors run.
HEDRICH Xiamen Vacuum Equipment Manufacturing Co., Ltd.: Equipment value depends on installation, training, spares and troubleshooting after shipment. Confirm remote and on-site support, language, response time, software access, electrical documentation, consumables and the list of critical components that can be sourced in the destination market.
HEDRICH Xiamen Vacuum Equipment Manufacturing Co., Ltd.'s source record currently includes Official HEDRICH China Page, Cast-Resin Insulation Equipment, Clamping, Molds, Mixing and Dosing, Vacuum Pressure Impregnation Equipment. These links let a buyer distinguish company-published information from GetFRP's own qualification guidance and return to the original context when a claim changes.
No company-level certification is presently listed in the reviewed profile. That does not prove that no document exists, but it means the RFQ should ask for the quality-system certificate and every product-specific test or approval needed by the buyer rather than assuming a certification from market reputation.
GetFRP last recorded a public-source review date of 2026-08-25. Public websites and catalogs can change after review, so commercial decisions should use newly downloaded files and direct supplier confirmation. GetFRP's public or claimed status describes profile ownership and identity controls; it does not certify every product statement or predict order performance.
Official product catalogs, web directories and technical guides published by the supplier.
Xiamen entity, operating history and contacts.
Open catalogVacuum casting, APG, shot dosing and infusion.
Open catalogAPG and LSR clamping, molds and mixing systems.
Open catalogVacuum pressure impregnation technology.
Open catalogOrganizer source for the Xiamen exhibitor and equipment scope.
Open catalog
Nanjing Haoli Hydraulic Equipment Co., Ltd. states that it was founded in 1999 and entered the composites field in 2000. Its current official catalog covers hydraulic, servo-hydraulic and caterpillar-puller pultrusion machines plus pultrusion-winding, resin-injection, automatic cut-off, mat-cutting, take-up, braided-pultrusion cable-conduit and die equipment. The China Composites Expo N directory supports the exhibitor identity and FRP pultrusion-equipment scope. Haoli sells the machinery, tooling and process support used to manufacture composite profiles. The website's statement that a machine can pull glass- or carbon-fiber sections describes compatible workpieces; it is not evidence that Haoli supplies carbon fiber, fiberglass, pultruded profiles, conduits or other finished composites. GetFRP therefore does not assign material or finished-product demand keywords to this equipment profile.
Nabertherm Ltd. (Shanghai), identified in Chinese exhibition material as Nabertherm's Shanghai industrial-furnace company, is the China sales-company entry published on the current Nabertherm website. The reviewed official navigation covers air-circulation and drying ovens, radiation-heated chamber furnaces, high-temperature solutions, protective-gas and vacuum systems, laboratory muffle and tube furnaces, debinding and sintering systems, melting and holding furnaces, custom furnace engineering and process-control documentation. The China Composites Expo N directory independently supports the Shanghai exhibitor identity. This is an equipment profile: carbon fiber, fiberglass, resin, ceramic, metal powder or any other workpiece processed in a furnace is not a material manufactured by Nabertherm. The exhibition category also is not evidence that the Shanghai entity offers composite-curing autoclaves, so GetFRP does not publish an autoclave product or inject material-product keywords.
Lianyungang Weide Composite Materials Facilities Co., Ltd. says on its current official website that it was established in 2001 and develops and manufactures composite-production equipment. The published range covers continuous-filament-winding FRP pipe lines, high-pressure hydrogen-cylinder winding lines, four-axis and horizontal winding machines, high-pressure epoxy-pipe lines, centrifugal-casting GRP pipe lines, lighting-pole lines and supporting manipulators, curing ovens, resin-supply, intelligent feeding, conveying, joint-making and quality-assurance systems. China Composites Expo's L directory lists the matching exhibitor. Weide sells the machinery used to make pipes, cylinders and poles; those outputs are not presented as Weide-manufactured FRP or carbon-fiber products. GetFRP therefore excludes reinforcement, FRP-pipe and finished-cylinder supplier keywords. Capacity, performance, import-substitution, service-life and mechanical-property statements are supplier claims that must be validated against the quoted configuration, representative trials, FAT, SAT and contractual acceptance records.