Jiangsu Aulland New Material Technology is a source-reviewed supplier profile for fiberglass panels, fiberglass grating, and pultruded, with every search topic tied to company-published product or process evidence and separated from buyer-side verification requirements.
Jiangsu Aulland New Material Technology Co., Ltd. is a Nantong supplier of FRP grating, pultruded fiberglass profiles and access structures. Its current official product pages and the 2026 China Composites Expo directory support molded grating, pultruded grating, phenolic grating, micromesh and covered panels, I- and H-beams, flat bars, tubes, kick plates, handrails, stair treads, ladders and custom sections. GetFRP therefore assigns measured-demand phrases including fiberglass grating, FRP grating, fiberglass pultruded grating, molded FRP grating and pultruded fiberglass to explicit offers. Hand lay-up or pultrusion capability is not expanded into pipe, sheet or rebar products that the reviewed catalog did not publish. The English subdomain was intermittently unavailable during review, while the official Chinese domain remained accessible. The complete current logo was downloaded on 2026-08-26 from the exact OMO asset referenced by the official header, trimmed only to remove transparent canvas, and stored locally by GetFRP. ASTM E84, ABS and ISO 9001 references remain company claims because certificate files aligned to the legal entity, address, scope, number and validity date were not verified.
The reviewed product and process scope makes this supplier relevant to buyer searches for fiberglass panels, fiberglass grating, pultruded, and FRP grating. These phrases describe products or processes supported by the cited public scope; they do not expand the supplier's catalog or replace technical qualification.
Is this your business?
Register or sign in to claim your company, update this public profile and respond to buyer inquiries.
This procurement profile is built for engineering and procurement teams comparing a finished FRP or composite component against a controlled drawing, service condition and inspection plan. It organizes Jiangsu Aulland New Material Technology Co., Ltd.'s published products, processes, certificate references and official sources around the primary topic “Jiangsu Aulland New Material Technology FRP Grating.” The objective is to help a buyer decide whether to open a controlled RFQ, not to turn a broad company catalog into an unsupported approval.
Jiangsu Aulland New Material Technology Co., Ltd. currently lists 10 product or service groups and 10 manufacturing or support capabilities in this reviewed record. The public scope indicates what to investigate, while the buyer remains responsible for drawings, design calculations, standards, current certificates, sample approval and order-specific commercial confirmation. Claims below are attributed to the attached source set unless GetFRP explicitly labels them as qualification guidance.
Aulland's reviewed catalog is centered on molded and pultruded grating plus pultruded members for industrial platforms, walkways, stairs and corrosion-resistant structures. A molded-grating RFQ should define resin family, flame or low-smoke requirement, whether a phenolic system is required, mesh, panel size, thickness, load direction, glass content, surface, color, UV stabilization, span, point and distributed loads, deflection limit, sealed cut edges and hold-down clips. Micromesh, gritted, concave and solid-covered constructions are not interchangeable. Pultruded grating and I-beam, H-beam, flat-bar, square-tube, flat-tube and kick-plate inquiries need cross-section drawings, cut length, tolerances, straightness, resin, roving and mat architecture, surface veil, mechanical properties, Tg, chemical exposure, fire behavior and drilled-hole locations. Handrail, stair-tread and ladder projects should add platform layout, connection details, fastener material, rail height, kick plate, load combinations, site-cut restrictions and installation responsibility. A custom profile needs its critical dimensions, draft, wall thickness, radii, cosmetic surface, first-article plan and tool ownership frozen before the die is released. The official site displays ASTM E84, ABS, ISO 9001, scale and export-ratio claims, but this review did not establish a certificate chain for each statement. Buyers should request original files and verify holder, legal address, product scope, test method, specimen thickness and validity date. The English subdomain intermittently closed connections while the Chinese official site remained accessible. Its complete logo was downloaded on 2026-08-26 from the exact OMO asset referenced by the official page, trimmed only to remove transparent canvas, and stored locally rather than hotlinked. Before award, confirm MOQ, tool charge, sample timing, production lead time, packing, pallets, container loading, Incoterms, destination documents and replacement-part support.
No company-level certification is listed on this profile.
Evaluate Jiangsu Aulland New Material Technology Co., Ltd. as a potential composite product manufacturer for fiberglass panels, verify the public evidence and prepare a comparable RFQ.
Jiangsu Aulland New Material Technology Co., Ltd. includes this product in its published supply scope. Treat that listing as a starting point: request the current datasheet or drawing, material and construction, available grades or dimensions, guaranteed properties, production site, quotation revision and evidence that represents the exact item offered.
For Pultruded fiberglass grating panels, buyers should convert the catalog description into an acceptance specification. Confirm standard and custom options, raw-material system, critical tolerances, surface or finish, test basis, sample route, MOQ, lead time and packing. Any alternative proposed by Jiangsu Aulland New Material Technology Co., Ltd. should be identified explicitly rather than treated as automatically equivalent.
This product broadens the supplier's public portfolio, but GetFRP does not infer approval from a product name alone. Ask Jiangsu Aulland New Material Technology Co., Ltd. for the grade or model designation, manufacturing route, current technical file, production and test location, batch traceability and the limits that apply to published performance values.
Jiangsu Aulland New Material Technology Co., Ltd. publishes Compression molding of FRP grating as part of its capability scope. Buyers should ask which site and equipment perform the work, the practical size or material limits, the normal control records and whether the proposed order uses the same route. Subcontracted stages should be visible in the quality plan.
The relevance of Continuous pultrusion of fiberglass profiles depends on the requested product and acceptance criteria. During qualification, request a process flow, critical control points, inspection or test method, operator or equipment qualification where applicable, nonconformance handling and a recent example that represents the offered production route.
For sourcing purposes, Profile and grating cutting is a capability signal rather than independent verification. Confirm capacity, tooling or fixture availability, setup and changeover assumptions, lot definition, sample approval and traceability. The quotation should identify any limitation that could affect geometry, performance, appearance or delivery.
These are sourcing contexts suggested by the published product scope, not confirmed project references. Validate the exact application, design basis and evidence in the RFQ.
Jiangsu Aulland New Material Technology Co., Ltd.'s listed grating or platform products may be relevant to industrial access systems. Qualification should identify molded or pultruded construction, resin, panel and mesh geometry, surface, support span, load and deflection limit, cut plan, clips, fire or smoke requirement and the test basis behind any published load table.
Jiangsu Aulland New Material Technology Co., Ltd.'s public scope suggests a potential route for piping, tanks or corrosion-resistant process equipment. The RFQ should define service chemistry, temperature, pressure or stiffness class, liner, structural wall, joints, supports, nozzles, inspection and transport. Project-specific design and evidence remain necessary before the supplier can be treated as a fit.
Jiangsu Aulland New Material Technology Co., Ltd.'s listed reinforcement products may be relevant to corrosion-sensitive concrete or civil works. Buyers should state fiber type, nominal area, guaranteed tensile property, modulus, bond surface, bend geometry, test method, design code, lot traceability and packaging. FRP reinforcement should not be specified or handled as if it were interchangeable with steel.
Jiangsu Aulland New Material Technology Co., Ltd.'s source record currently includes Official Aulland Website, Aulland Company Profile, Aulland Product Catalog, Aulland Pultruded Profiles. These links let a buyer distinguish company-published information from GetFRP's own qualification guidance and return to the original context when a claim changes.
No company-level certification is presently listed in the reviewed profile. That does not prove that no document exists, but it means the RFQ should ask for the quality-system certificate and every product-specific test or approval needed by the buyer rather than assuming a certification from market reputation.
GetFRP last recorded a public-source review date of 2026-08-26. Public websites and catalogs can change after review, so commercial decisions should use newly downloaded files and direct supplier confirmation. GetFRP's public or claimed status describes profile ownership and identity controls; it does not certify every product statement or predict order performance.
Official product catalogs, web directories and technical guides published by the supplier.
Official company and product entry.
Open catalogCompany history and published scope.
Open catalogGrating, profiles and structures.
Open catalogI/H beams, bars, tubes and custom sections.
Open catalogPublished Nantong address, phones and email.
Open catalogOrganizer source for exhibitor identity.
Open catalog
According to its official website, F1 Composites is FengDu New Material's international export company. It supplies pultruded FRP profiles, gratings, fiberglass window and door systems, and custom pultrusions for overseas projects, with English-language engineering, quality documentation, export coordination and international delivery support.
Nanjing Hitech Composites Co., Ltd. publishes an integrated HICOMA and Lica offer spanning pultruded carbon- and glass-fiber profiles, high-performance reinforcement fabrics and structural adhesives. Its current official catalog explicitly lists carbon-fiber plate, rod, tube, channel, rebar and prestressed plate systems; fiberglass beams, channels, angles, tubes, plates, rebar and grating; carbon- and glass-fiber fabrics; and bonding products for wind blades, carbon plate and civil structures. The China Composites Expo directory independently supports the Nanjing exhibitor identity and its pultruded-composite and epoxy-adhesive scope. GetFRP therefore assigns only demand phrases supported by those actual products, including carbon-fiber products, plates, rods, tubes and fabrics, pultruded fiberglass profiles and fiberglass grating. An application, system or performance label is not treated as a substitute for the offered grade, section drawing, laminate architecture, adhesive TDS or project engineering.
Nanjing Mingfeng Composite Materials Co., Ltd. says on its official website that it was founded in 2002 and manufactures pultruded and molded fiberglass products. The current catalog explicitly lists round and rectangular tube, rod, channel, I-beam, molded and pultruded grating, insulation ladders, tool handles, epoxy fiberglass rod, guardrail, flagpole, greenhouse support and other custom products. The China Composites Expo N directory also supports the exhibitor identity and its profile, tube, grating, ladder, handle, radome and molded-part scope. GetFRP maps fiberglass grating, pultruded fiberglass profiles and fiberglass-reinforced pipe demand only to those actual catalog items. Educational articles on the site discuss broader FRP applications such as tanks, cooling towers and flues; they are not treated as proof that Mingfeng currently manufactures every discussed product.