LAP Laser Applications (Shanghai) is presented as a source-reviewed supplier profile centered on CAD-PRO Xpert laser projectors, with company-published capability separated from buyer-side verification requirements.
LAP Laser Applications (Shanghai) Co., Ltd. is LAP's China entity for laser-projection and measurement applications. China Composites Expo lists it as an auxiliary laser-projection equipment supplier for composite layup. The current official site publishes CAD-PRO Xpert and CAD-PRO projectors, PRO-SOFT projection software, INSPECT-PRO inspection software and DTEC-PRO camera systems, with solutions for general composite layup and rotor-blade manufacturing. The system projects CAD contours onto a mold or workpiece to guide ply, core, insert, root and web positioning and to support quality workflows. Projectors, cameras and software do not manufacture the prepreg, dry fiber, laminate or blade being positioned. GetFRP therefore excludes those application materials and finished products from LAP's supplier-keyword set, and it does not treat positioning assistance as product or laminate certification. Entity founding date, management certificates and application-specific accuracy or takt remain unverified unless supported by current scoped documents and an acceptance test.
Is this your business?
Register or sign in to claim your company, update this public profile and respond to buyer inquiries.
This procurement profile is built for plant owners and process engineers comparing production scope, controls, commissioning responsibility and lifecycle support. It organizes LAP Laser Applications (Shanghai) Co., Ltd.'s published products, processes, certificate references and official sources around the primary topic “LAP Laser Applications (Shanghai) CAD-PRO Xpert laser projectors.” The objective is to help a buyer decide whether to open a controlled RFQ, not to turn a broad company catalog into an unsupported approval.
LAP Laser Applications (Shanghai) Co., Ltd. currently lists 9 product or service groups and 9 manufacturing or support capabilities in this reviewed record. The public scope indicates what to investigate, while the buyer remains responsible for drawings, design calculations, standards, current certificates, sample approval and order-specific commercial confirmation. Claims below are attributed to the attached source set unless GetFRP explicitly labels them as qualification guidance.
LAP's composites solution combines CAD-PRO projectors, PRO-SOFT data preparation and projection software, INSPECT-PRO quality support and DTEC-PRO camera systems for contour, sequence and component-position guidance in general composite and rotor-blade layup. An RFQ should define the mold and workpiece envelope, curvature, projection distance and angle, mounting constraints, line color and width, ambient light, required visibility, dimensional accuracy and repeatability, working temperature, dust and vibration, number of simultaneous work zones and any operator or equipment occlusion. Add the CAD and manufacturing-data formats, coordinate system, datum strategy, ply naming and sequence, revision control, user roles, recipe approval, traceability, image or result retention, MES or PLM interfaces, backup, cybersecurity and permitted remote access. The supplier should produce a coverage and projector-layout study that identifies blind areas, overlap, calibration targets, structures, cabling and service access. Where multiple projectors share a work area, define blending or handover, coordinate alignment and recovery after a unit is moved. Camera-assisted calibration and INSPECT-PRO functions should be tied to measurable acceptance steps; a projected outline can guide an operator but does not itself prove ply material, orientation, debulk, cure or laminate quality. FAT should use representative CAD data and a suitable target or mold to test data import, projection geometry, calibration, drift, switching, alarms, user permissions and record export. SAT should repeat with the buyer's actual mold, lighting, fixtures, operators and network, including sustained use, changeover, power-loss recovery, backup restoration and training. For rotor blades, state shell, spar-cap, root, web, core and insert workflows separately, identify gantries or moving structures, and define how the system handles long molds and accumulated coordinate error. The quotation should separate projectors, mounts, cameras, calibration targets, workstations, software licences, interfaces, installation, commissioning, training, calibration, maintenance, spares and travel. Obtain current manuals, electrical and network requirements, laser classification and safety instructions, software support policy and service response. Published application pages establish an equipment use case only; they do not make LAP a manufacturer of prepreg, dry fiber, carbon or glass products, laminates or wind-turbine blades, so those product-demand keywords remain excluded.
No company-level certification is listed on this profile.
Evaluate LAP Laser Applications (Shanghai) Co., Ltd. as a potential composite manufacturing equipment supplier for CAD-PRO Xpert laser projectors, verify the public evidence and prepare a comparable RFQ.
LAP Laser Applications (Shanghai) Co., Ltd. includes this product in its published supply scope. Treat that listing as a starting point: request the current datasheet or drawing, material and construction, available grades or dimensions, guaranteed properties, production site, quotation revision and evidence that represents the exact item offered.
For CAD-PRO laser projectors, buyers should convert the catalog description into an acceptance specification. Confirm standard and custom options, raw-material system, critical tolerances, surface or finish, test basis, sample route, MOQ, lead time and packing. Any alternative proposed by LAP Laser Applications (Shanghai) Co., Ltd. should be identified explicitly rather than treated as automatically equivalent.
This product broadens the supplier's public portfolio, but GetFRP does not infer approval from a product name alone. Ask LAP Laser Applications (Shanghai) Co., Ltd. for the grade or model designation, manufacturing route, current technical file, production and test location, batch traceability and the limits that apply to published performance values.
A useful RFQ for INSPECT-PRO quality-inspection software should describe the buyer's application without disclosing unnecessary proprietary detail, then state the measurable product requirements. Compare LAP Laser Applications (Shanghai) Co., Ltd.'s response against the same dimensions, quantity, inspection, documentation, Incoterm and delivery assumptions used for every shortlisted supplier.
LAP Laser Applications (Shanghai) Co., Ltd. publishes CAD-contour laser projection as part of its capability scope. Buyers should ask which site and equipment perform the work, the practical size or material limits, the normal control records and whether the proposed order uses the same route. Subcontracted stages should be visible in the quality plan.
The relevance of Composite-ply positioning and sequence guidance depends on the requested product and acceptance criteria. During qualification, request a process flow, critical control points, inspection or test method, operator or equipment qualification where applicable, nonconformance handling and a recent example that represents the offered production route.
For sourcing purposes, Prepreg and dry-fiber placement assistance is a capability signal rather than independent verification. Confirm capacity, tooling or fixture availability, setup and changeover assumptions, lot definition, sample approval and traceability. The quotation should identify any limitation that could affect geometry, performance, appearance or delivery.
Buyers evaluating Core, insert and fastener positioning should connect the process claim to evidence: an equipment list, controlled procedure, representative report, production photograph or witnessed sample may each answer a different risk. LAP Laser Applications (Shanghai) Co., Ltd. should also explain how the result is checked before release and recorded for the shipment.
These are sourcing contexts suggested by the published product scope, not confirmed project references. Validate the exact application, design basis and evidence in the RFQ.
LAP Laser Applications (Shanghai) Co., Ltd.: The listed equipment can form part of a new production line, but machine selection should start from the product envelope, material system, throughput, utility and quality requirements. Ask the supplier to define every included station and the responsibility boundary for tooling, controls, guarding and downstream handling.
LAP Laser Applications (Shanghai) Co., Ltd.: For an expansion project, the buyer should document interfaces with existing creels, molds, heaters, cutters, extraction, material handling and plant controls. A factory acceptance test should use representative materials and demonstrate the agreed output and quality measures rather than only showing that individual motors run.
LAP Laser Applications (Shanghai) Co., Ltd.: Equipment value depends on installation, training, spares and troubleshooting after shipment. Confirm remote and on-site support, language, response time, software access, electrical documentation, consumables and the list of critical components that can be sourced in the destination market.
LAP Laser Applications (Shanghai) Co., Ltd.'s source record currently includes Official LAP China Website, Composites Industry Solutions, Composite Layup, Rotor-Blade Manufacturing. These links let a buyer distinguish company-published information from GetFRP's own qualification guidance and return to the original context when a claim changes.
No company-level certification is presently listed in the reviewed profile. That does not prove that no document exists, but it means the RFQ should ask for the quality-system certificate and every product-specific test or approval needed by the buyer rather than assuming a certification from market reputation.
GetFRP last recorded a public-source review date of 2026-08-25. Public websites and catalogs can change after review, so commercial decisions should use newly downloaded files and direct supplier confirmation. GetFRP's public or claimed status describes profile ownership and identity controls; it does not certify every product statement or predict order performance.
Official product catalogs, web directories and technical guides published by the supplier.
Official China product, industry and service entry.
Open catalogOfficial composite laser-projection overview.
Open catalogOfficial ply-contour and positioning workflow.
Open catalogOfficial blade-layup and component-positioning application.
Open catalogOfficial laser-projector product page.
Open catalogOfficial Shanghai entity, address, telephone and email.
Open catalogOrganizer source for the Shanghai entity and composite-layup projection scope.
Open catalog
Nanjing Haoli Hydraulic Equipment Co., Ltd. states that it was founded in 1999 and entered the composites field in 2000. Its current official catalog covers hydraulic, servo-hydraulic and caterpillar-puller pultrusion machines plus pultrusion-winding, resin-injection, automatic cut-off, mat-cutting, take-up, braided-pultrusion cable-conduit and die equipment. The China Composites Expo N directory supports the exhibitor identity and FRP pultrusion-equipment scope. Haoli sells the machinery, tooling and process support used to manufacture composite profiles. The website's statement that a machine can pull glass- or carbon-fiber sections describes compatible workpieces; it is not evidence that Haoli supplies carbon fiber, fiberglass, pultruded profiles, conduits or other finished composites. GetFRP therefore does not assign material or finished-product demand keywords to this equipment profile.
Nabertherm Ltd. (Shanghai), identified in Chinese exhibition material as Nabertherm's Shanghai industrial-furnace company, is the China sales-company entry published on the current Nabertherm website. The reviewed official navigation covers air-circulation and drying ovens, radiation-heated chamber furnaces, high-temperature solutions, protective-gas and vacuum systems, laboratory muffle and tube furnaces, debinding and sintering systems, melting and holding furnaces, custom furnace engineering and process-control documentation. The China Composites Expo N directory independently supports the Shanghai exhibitor identity. This is an equipment profile: carbon fiber, fiberglass, resin, ceramic, metal powder or any other workpiece processed in a furnace is not a material manufactured by Nabertherm. The exhibition category also is not evidence that the Shanghai entity offers composite-curing autoclaves, so GetFRP does not publish an autoclave product or inject material-product keywords.
Lianyungang Weide Composite Materials Facilities Co., Ltd. says on its current official website that it was established in 2001 and develops and manufactures composite-production equipment. The published range covers continuous-filament-winding FRP pipe lines, high-pressure hydrogen-cylinder winding lines, four-axis and horizontal winding machines, high-pressure epoxy-pipe lines, centrifugal-casting GRP pipe lines, lighting-pole lines and supporting manipulators, curing ovens, resin-supply, intelligent feeding, conveying, joint-making and quality-assurance systems. China Composites Expo's L directory lists the matching exhibitor. Weide sells the machinery used to make pipes, cylinders and poles; those outputs are not presented as Weide-manufactured FRP or carbon-fiber products. GetFRP therefore excludes reinforcement, FRP-pipe and finished-cylinder supplier keywords. Capacity, performance, import-substitution, service-life and mechanical-property statements are supplier claims that must be validated against the quoted configuration, representative trials, FAT, SAT and contractual acceptance records.