Leister Technologies (Shanghai) is presented as a source-reviewed supplier profile centered on Handheld hot-air tools, with company-published capability separated from buyer-side verification requirements.
Leister Technologies (Shanghai) Co., Ltd. is Leister's China sales, service and selected product-operations entity. Its current official site lists handheld hot-air tools, automatic welders, extrusion welders, process-air heaters, blowers, hot-air units and laser plastic-welding systems, while China Composites Expo classifies the company as a plastic-welding, heating and auxiliary-equipment supplier. The published manufacturing boundary matters: Leister-branded products are described as made in Switzerland, whereas WELDY products are assembled and manufactured in Shanghai. GetFRP does not transfer the wider group's production claims to the Shanghai legal entity. These machines may support thermoplastic joining or heating in composite-related operations, but equipment compatibility does not mean the company manufactures the fiberglass, carbon fiber, sheet, pipe or finished composite being processed. Consequently, material-supplier search phrases are intentionally excluded. Establishment in China is based on the official 2004 company statement; certifications and product approvals remain unverified here.
Is this your business?
Register or sign in to claim your company, update this public profile and respond to buyer inquiries.
This procurement profile is built for plant owners and process engineers comparing production scope, controls, commissioning responsibility and lifecycle support. It organizes Leister Technologies (Shanghai) Co., Ltd.'s published products, processes, certificate references and official sources around the primary topic “Leister Technologies (Shanghai) Handheld hot-air tools.” The objective is to help a buyer decide whether to open a controlled RFQ, not to turn a broad company catalog into an unsupported approval.
Leister Technologies (Shanghai) Co., Ltd. currently lists 9 product or service groups and 9 manufacturing or support capabilities in this reviewed record. The public scope indicates what to investigate, while the buyer remains responsible for drawings, design calculations, standards, current certificates, sample approval and order-specific commercial confirmation. Claims below are attributed to the attached source set unless GetFRP explicitly labels them as qualification guidance.
Leister China's official portfolio spans hot-air, extrusion and laser plastic welding plus industrial process heating. An RFQ should begin with the polymer or composite matrix, reinforcement or filler condition, part geometry, joint design, thickness, seam length, required appearance and strength, allowable heat-affected zone, production rate, duty cycle, utilities, work environment and applicable machine-safety rules. For handheld hot-air tools, define nozzle geometry, temperature and airflow range, operator ergonomics, field-power supply and the procedure used to qualify an operator. Automatic overlap or web-welding projects should add material feed, seam width, pressure, travel control, tracking, edge guidance, recipe storage, alarms and a sustained production trial. Extrusion-welding inquiries need compatible rod or granulate, preheat, extrusion output, shoe geometry, bead dimensions, surface preparation, weld orientation and repair access. Process-air heating systems require inlet and outlet temperature, airflow, pressure drop, heater power, sensor location, over-temperature protection, blower curve, ducting, control interface and safe shutdown. Laser plastic-welding projects should define wavelength compatibility, optical transmission and absorption of the real material stack, joint gap, clamping, contour or quasi-simultaneous route, line speed, optical working field, guarding, fume handling, traceability and inspection method. Require application trials with representative production material and record machine, nozzle or optics, temperature, flow, force, speed, environment and resulting weld quality. FAT and SAT should address output, repeatability, recipe control, alarms, guarding, emergency stop, restart, documentation and training. Buyers should separate main equipment, optics, controls, fixtures, software licences, extraction, installation, calibration, spares, wear parts, remote support and warranty in the quotation. The official China site distinguishes Leister-branded Swiss production from WELDY assembly and manufacturing in Shanghai; the offer should therefore identify the exact brand, model, manufacturing origin, seller, invoice, payee and service entity. Current manuals, declarations, electrical drawings, spare-parts lists and any product conformity evidence should match the quoted model and destination. No fiberglass, carbon-fiber, laminate or finished-part keyword is assigned simply because a welding or heating tool may be used in a composites plant.
No company-level certification is listed on this profile.
Evaluate Leister Technologies (Shanghai) Co., Ltd. as a potential composite manufacturing equipment supplier for Handheld hot-air tools, verify the public evidence and prepare a comparable RFQ.
Leister Technologies (Shanghai) Co., Ltd. includes this product in its published supply scope. Treat that listing as a starting point: request the current datasheet or drawing, material and construction, available grades or dimensions, guaranteed properties, production site, quotation revision and evidence that represents the exact item offered.
For Automatic plastic-welding machines, buyers should convert the catalog description into an acceptance specification. Confirm standard and custom options, raw-material system, critical tolerances, surface or finish, test basis, sample route, MOQ, lead time and packing. Any alternative proposed by Leister Technologies (Shanghai) Co., Ltd. should be identified explicitly rather than treated as automatically equivalent.
This product broadens the supplier's public portfolio, but GetFRP does not infer approval from a product name alone. Ask Leister Technologies (Shanghai) Co., Ltd. for the grade or model designation, manufacturing route, current technical file, production and test location, batch traceability and the limits that apply to published performance values.
A useful RFQ for Industrial process air heaters should describe the buyer's application without disclosing unnecessary proprietary detail, then state the measurable product requirements. Compare Leister Technologies (Shanghai) Co., Ltd.'s response against the same dimensions, quantity, inspection, documentation, Incoterm and delivery assumptions used for every shortlisted supplier.
Leister Technologies (Shanghai) Co., Ltd. publishes Hot-air plastic welding as part of its capability scope. Buyers should ask which site and equipment perform the work, the practical size or material limits, the normal control records and whether the proposed order uses the same route. Subcontracted stages should be visible in the quality plan.
The relevance of Extrusion plastic welding depends on the requested product and acceptance criteria. During qualification, request a process flow, critical control points, inspection or test method, operator or equipment qualification where applicable, nonconformance handling and a recent example that represents the offered production route.
For sourcing purposes, Automatic overlap and web welding is a capability signal rather than independent verification. Confirm capacity, tooling or fixture availability, setup and changeover assumptions, lot definition, sample approval and traceability. The quotation should identify any limitation that could affect geometry, performance, appearance or delivery.
Buyers evaluating Industrial process-air heating should connect the process claim to evidence: an equipment list, controlled procedure, representative report, production photograph or witnessed sample may each answer a different risk. Leister Technologies (Shanghai) Co., Ltd. should also explain how the result is checked before release and recorded for the shipment.
These are sourcing contexts suggested by the published product scope, not confirmed project references. Validate the exact application, design basis and evidence in the RFQ.
Leister Technologies (Shanghai) Co., Ltd.: The listed equipment can form part of a new production line, but machine selection should start from the product envelope, material system, throughput, utility and quality requirements. Ask the supplier to define every included station and the responsibility boundary for tooling, controls, guarding and downstream handling.
Leister Technologies (Shanghai) Co., Ltd.: For an expansion project, the buyer should document interfaces with existing creels, molds, heaters, cutters, extraction, material handling and plant controls. A factory acceptance test should use representative materials and demonstrate the agreed output and quality measures rather than only showing that individual motors run.
Leister Technologies (Shanghai) Co., Ltd.: Equipment value depends on installation, training, spares and troubleshooting after shipment. Confirm remote and on-site support, language, response time, software access, electrical documentation, consumables and the list of critical components that can be sourced in the destination market.
Leister Technologies (Shanghai) Co., Ltd.'s source record currently includes Official Leister China Website, About Leister China, Plastic-Welding Products, Process-Heat Products. These links let a buyer distinguish company-published information from GetFRP's own qualification guidance and return to the original context when a claim changes.
No company-level certification is presently listed in the reviewed profile. That does not prove that no document exists, but it means the RFQ should ask for the quality-system certificate and every product-specific test or approval needed by the buyer rather than assuming a certification from market reputation.
GetFRP last recorded a public-source review date of 2026-08-25. Public websites and catalogs can change after review, so commercial decisions should use newly downloaded files and direct supplier confirmation. GetFRP's public or claimed status describes profile ownership and identity controls; it does not certify every product statement or predict order performance.
Official product catalogs, web directories and technical guides published by the supplier.
Official China company, product and service entry.
Open catalogOfficial China history, brand and manufacturing boundary.
Open catalogOfficial hot-air, automatic and extrusion-welding directory.
Open catalogOfficial air-heater, blower and hot-air-unit directory.
Open catalogOfficial laser system, optics and control scope.
Open catalogOfficial Shanghai address, telephone and email.
Open catalogOrganizer source for the entity and welding, heating and auxiliary-equipment scope.
Open catalog
Nanjing Haoli Hydraulic Equipment Co., Ltd. states that it was founded in 1999 and entered the composites field in 2000. Its current official catalog covers hydraulic, servo-hydraulic and caterpillar-puller pultrusion machines plus pultrusion-winding, resin-injection, automatic cut-off, mat-cutting, take-up, braided-pultrusion cable-conduit and die equipment. The China Composites Expo N directory supports the exhibitor identity and FRP pultrusion-equipment scope. Haoli sells the machinery, tooling and process support used to manufacture composite profiles. The website's statement that a machine can pull glass- or carbon-fiber sections describes compatible workpieces; it is not evidence that Haoli supplies carbon fiber, fiberglass, pultruded profiles, conduits or other finished composites. GetFRP therefore does not assign material or finished-product demand keywords to this equipment profile.
Nabertherm Ltd. (Shanghai), identified in Chinese exhibition material as Nabertherm's Shanghai industrial-furnace company, is the China sales-company entry published on the current Nabertherm website. The reviewed official navigation covers air-circulation and drying ovens, radiation-heated chamber furnaces, high-temperature solutions, protective-gas and vacuum systems, laboratory muffle and tube furnaces, debinding and sintering systems, melting and holding furnaces, custom furnace engineering and process-control documentation. The China Composites Expo N directory independently supports the Shanghai exhibitor identity. This is an equipment profile: carbon fiber, fiberglass, resin, ceramic, metal powder or any other workpiece processed in a furnace is not a material manufactured by Nabertherm. The exhibition category also is not evidence that the Shanghai entity offers composite-curing autoclaves, so GetFRP does not publish an autoclave product or inject material-product keywords.
Lianyungang Weide Composite Materials Facilities Co., Ltd. says on its current official website that it was established in 2001 and develops and manufactures composite-production equipment. The published range covers continuous-filament-winding FRP pipe lines, high-pressure hydrogen-cylinder winding lines, four-axis and horizontal winding machines, high-pressure epoxy-pipe lines, centrifugal-casting GRP pipe lines, lighting-pole lines and supporting manipulators, curing ovens, resin-supply, intelligent feeding, conveying, joint-making and quality-assurance systems. China Composites Expo's L directory lists the matching exhibitor. Weide sells the machinery used to make pipes, cylinders and poles; those outputs are not presented as Weide-manufactured FRP or carbon-fiber products. GetFRP therefore excludes reinforcement, FRP-pipe and finished-cylinder supplier keywords. Capacity, performance, import-substitution, service-life and mechanical-property statements are supplier claims that must be validated against the quoted configuration, representative trials, FAT, SAT and contractual acceptance records.