Ningbo Haigela New Material Technology is presented as a source-reviewed supplier profile centered on Higlar liquid-crystal-polyarylate (LCP) fiber, with company-published capability separated from buyer-side verification requirements.
Ningbo Haigela New Material Technology Co., Ltd. publishes liquid-crystal-polyarylate (LCP) fiber and converted materials under the Higlar identity. Its current official product directory covers high-strength filament, chopped fiber, monofilament, ply-twisted or twisted yarn, colored, low-dielectric, multicomponent, soft and high-elasticity LCP variants, together with fabric, short-fiber paper and pulp paper. Individual pages expose HT and MF grade families rather than one interchangeable commodity. The China Composites Expo N directory independently lists the Ningbo exhibitor. The official Chinese and English company pages give inconsistent 2017 and 2018 establishment dates, so GetFRP leaves the field blank. Published references to 5G, robot cable, aerospace, radomes, protective clothing and sports fabrics describe possible applications; they do not prove that Haigela manufactures every downstream cable, radome, garment or sporting product.
Is this your business?
Register or sign in to claim your company, update this public profile and respond to buyer inquiries.
This procurement profile is built for engineering and procurement teams comparing a finished FRP or composite component against a controlled drawing, service condition and inspection plan. It organizes Ningbo Haigela New Material Technology Co., Ltd.'s published products, processes, certificate references and official sources around the primary topic “Ningbo Haigela New Material Technology Higlar liquid-crystal-polyarylate (LCP) fiber.” The objective is to help a buyer decide whether to open a controlled RFQ, not to turn a broad company catalog into an unsupported approval.
Ningbo Haigela New Material Technology Co., Ltd. currently lists 12 product or service groups and 10 manufacturing or support capabilities in this reviewed record. The public scope indicates what to investigate, while the buyer remains responsible for drawings, design calculations, standards, current certificates, sample approval and order-specific commercial confirmation. Claims below are attributed to the attached source set unless GetFRP explicitly labels them as qualification guidance.
An LCP-fiber inquiry should identify the exact grade, polymer chemistry and form: filament, chopped fiber, monofilament, plied or twisted yarn, fabric, short-fiber paper, pulp or pulp paper. Define linear density, filament diameter, end count, twist direction and level, color, package build, cut length, moisture, finish or surface treatment, tensile strength, modulus, elongation, shrinkage, thermal limit, dielectric target and batch tolerance. Chopped fiber also needs nominal and allowable length distribution, dust, agglomeration, bulk density, dispersion and matrix compatibility. Fabric requires weave, ends and picks, areal weight, width, roll length, edges, splices and defect limits. Short-fiber or pulp paper requires fiber length, thickness, basis weight, porosity, uniformity, binder, directionality, width and roll or sheet packing. Higlar's published HT, MF and functional families must not be substituted on the strength of a category name. Request the current grade TDS and SDS, sample certificate fields, test methods and statistical basis, then run the material through the actual resin, braiding, weaving, papermaking, coating or cable process. High-strength, low-dielectric, soft, elastic, thermal and chemical descriptions must be tied to the named grade, specimen construction, direction, conditioning and test frequency; they are not blanket guarantees for a finished downstream assembly. A first-article trial should record material lot, storage and conditioning, equipment tension, temperature and speed, dispersion or impregnation behavior, conversion settings and finished performance. Repeat supply should define lot traceability, retention samples, change notification, COA fields and nonconformance handling. Export inquiries also need the contracting and payee entity, manufacturing site, origin, moisture barrier and bobbin protection, MOQ, lead time, Incoterm, transport and destination chemical or fiber documentation. Company-published scale, R&D, patent, customer and certification statements remain unverified until documents match the current Ningbo legal entity, address, scope, number and validity. Applications such as 5G, robot cables, radomes, protective clothing and sports textiles are qualification contexts, not product keywords for finished goods.
No company-level certification is listed on this profile.
Evaluate Ningbo Haigela New Material Technology Co., Ltd. as a potential composite product manufacturer for Higlar liquid-crystal-polyarylate (LCP) fiber, verify the public evidence and prepare a comparable RFQ.
Ningbo Haigela New Material Technology Co., Ltd. includes this product in its published supply scope. Treat that listing as a starting point: request the current datasheet or drawing, material and construction, available grades or dimensions, guaranteed properties, production site, quotation revision and evidence that represents the exact item offered.
For HT-series high-strength LCP filament yarn, buyers should convert the catalog description into an acceptance specification. Confirm standard and custom options, raw-material system, critical tolerances, surface or finish, test basis, sample route, MOQ, lead time and packing. Any alternative proposed by Ningbo Haigela New Material Technology Co., Ltd. should be identified explicitly rather than treated as automatically equivalent.
This product broadens the supplier's public portfolio, but GetFRP does not infer approval from a product name alone. Ask Ningbo Haigela New Material Technology Co., Ltd. for the grade or model designation, manufacturing route, current technical file, production and test location, batch traceability and the limits that apply to published performance values.
A useful RFQ for LCP monofilament should describe the buyer's application without disclosing unnecessary proprietary detail, then state the measurable product requirements. Compare Ningbo Haigela New Material Technology Co., Ltd.'s response against the same dimensions, quantity, inspection, documentation, Incoterm and delivery assumptions used for every shortlisted supplier.
Ningbo Haigela New Material Technology Co., Ltd. publishes Melt spinning of LCP polymer as part of its capability scope. Buyers should ask which site and equipment perform the work, the practical size or material limits, the normal control records and whether the proposed order uses the same route. Subcontracted stages should be visible in the quality plan.
The relevance of High-strength LCP filament production depends on the requested product and acceptance criteria. During qualification, request a process flow, critical control points, inspection or test method, operator or equipment qualification where applicable, nonconformance handling and a recent example that represents the offered production route.
For sourcing purposes, Filament chopping and length customization is a capability signal rather than independent verification. Confirm capacity, tooling or fixture availability, setup and changeover assumptions, lot definition, sample approval and traceability. The quotation should identify any limitation that could affect geometry, performance, appearance or delivery.
Buyers evaluating Monofilament and multi-end yarn production should connect the process claim to evidence: an equipment list, controlled procedure, representative report, production photograph or witnessed sample may each answer a different risk. Ningbo Haigela New Material Technology Co., Ltd. should also explain how the result is checked before release and recorded for the shipment.
These are sourcing contexts suggested by the published product scope, not confirmed project references. Validate the exact application, design basis and evidence in the RFQ.
Ningbo Haigela New Material Technology Co., Ltd.: A radome RFQ should define frequency bands, transmission loss, reflection, dielectric properties, antenna clearance, section drawing, material, finish, wind and ice loads, UV and weather exposure, mounting, drainage and dimensional tolerance. Require representative radio-frequency, mechanical and environmental test evidence for the offered construction rather than a generic material statement.
Ningbo Haigela New Material Technology Co., Ltd.'s reinforcement range can be screened for laminating, pultrusion, winding, molding or conversion programs. Buyers should confirm grade, sizing, architecture, width, tex or areal weight, package, splice and moisture limits, then run a representative processing trial before approving the material for repeat production.
Ningbo Haigela New Material Technology Co., Ltd.'s tooling scope can be considered for new or replacement production tools. Buyers should release controlled product and interface drawings, material and process assumptions, critical datums, tool material and treatment, heating or flow requirements, trial conditions, acceptance measurements, ownership, maintenance and protected transport.
Ningbo Haigela New Material Technology Co., Ltd.'s source record currently includes Higlar English Website, Higlar Product Directory, LCP Fiber Product Page, Published Applications. These links let a buyer distinguish company-published information from GetFRP's own qualification guidance and return to the original context when a claim changes.
No company-level certification is presently listed in the reviewed profile. That does not prove that no document exists, but it means the RFQ should ask for the quality-system certificate and every product-specific test or approval needed by the buyer rather than assuming a certification from market reputation.
GetFRP last recorded a public-source review date of 2026-08-25. Public websites and catalogs can change after review, so commercial decisions should use newly downloaded files and direct supplier confirmation. GetFRP's public or claimed status describes profile ownership and identity controls; it does not certify every product statement or predict order performance.
Official product catalogs, web directories and technical guides published by the supplier.
Official company and LCP-material entry point.
Open catalogOfficial fiber, fabric, paper and pulp directory.
Open catalogRepresentative official grade and specification fields.
Open catalogCompany-published application contexts requiring project validation.
Open catalogOfficial technical and service channel.
Open catalogOrganizer source for the Ningbo Haigela exhibitor.
Open catalog
Jiangsu Aosheng Composite Materials Technology Co., Ltd. is a Suzhou-based carbon-composite company whose current corporate website and 2026 China Composites Expo listing support carbon-fiber woven and hybrid fabrics, prepreg, wind-blade pultruded plate and composite application development. The official site also presents automotive, sports, hydrogen, aviation and overseas footprints under the Aosheng group. GetFRP therefore assigns measured-demand phrases such as carbon fiber fabric, carbon fiber plate, pultruded, resin infusion and vacuum infusion only where a published product or manufacturing route supports them. Fishing rods may be an end use of prepreg, but they are not listed here as an Aosheng finished product. Likewise, automotive parts, sports products and hydrogen cylinders are marked as group-sector inquiries rather than automatically attributed to the Jiangsu parent factory. Buyers must confirm the exact legal entity, production site and specification behind a quotation. Awards, customer relationships, capacity, CNAS, patent and standards-participation statements on the website remain company claims, not GetFRP verification.
Nanjing Hitech Composites Co., Ltd. publishes an integrated HICOMA and Lica offer spanning pultruded carbon- and glass-fiber profiles, high-performance reinforcement fabrics and structural adhesives. Its current official catalog explicitly lists carbon-fiber plate, rod, tube, channel, rebar and prestressed plate systems; fiberglass beams, channels, angles, tubes, plates, rebar and grating; carbon- and glass-fiber fabrics; and bonding products for wind blades, carbon plate and civil structures. The China Composites Expo directory independently supports the Nanjing exhibitor identity and its pultruded-composite and epoxy-adhesive scope. GetFRP therefore assigns only demand phrases supported by those actual products, including carbon-fiber products, plates, rods, tubes and fabrics, pultruded fiberglass profiles and fiberglass grating. An application, system or performance label is not treated as a substitute for the offered grade, section drawing, laminate architecture, adhesive TDS or project engineering.
Jiangsu Changhai Composite Materials Holding Co., Ltd. is a Changzhou supplier of glass-fiber reinforcement and thermoplastic composite materials. Its current official catalog and the 2026 China Composites Expo directory support roving, chopped strands, chopped strand mat, surface and continuous mat, woven roving, biaxial and stitched combinations, mesh, LFT reinforcement, CFRT tape and glass-reinforced thermoplastic panels. GetFRP assigns measured-demand phrases such as chopped strand mat, fiberglass cloth, fiberglass mat, fiberglass chopped strand mat and fiberglass panels only to these published products. The thermoplastic honeycomb offer is described as a core with continuous-glass-fiber-reinforced CFRT skins, not as a solid fiberglass panel or a claim that every honeycomb grade contains glass. Product-specific roving end uses do not mean Changhai manufactures the customer's finished pipe, SMC part or pultruded profile. The complete current logo was downloaded on 2026-08-26 from the exact CDN asset referenced by the official header, trimmed only to remove transparent canvas, and stored locally by GetFRP. Capacity, market-position and certification statements remain company claims pending certificate- and plant-level verification.