Ningbo Jingwei CNC is presented as a source-reviewed supplier profile centered on SC-series digital cutting machines for composite, with company-published capability separated from buyer-side verification requirements.
Ningbo Jingwei CNC Co., Ltd. (JWEI) publishes digital cutting equipment for flexible materials and a dedicated composite-industry solution built around its SC series and CB03E-2516-RQ system. The current official composite brochure identifies dry carbon fabric, carbon prepreg, cured carbon plate, fiberglass prepreg and dry fabric, epoxy board, polyester acoustic panel, PE or release film, mesh, graphite, rubber and foam among the materials that can be evaluated. Published functions include cutting, creasing, plotting, routing, vacuum hold-down and digital nesting, with the configured material determining the usable tool, thickness, speed and result. The China Composites Expo N directory independently lists the Ningbo exhibitor. This is an equipment and process profile: carbon fiber, fiberglass, prepreg, films and cut components are customer materials or outputs, not evidence that JWEI manufactures those materials or finished composite products.
Is this your business?
Register or sign in to claim your company, update this public profile and respond to buyer inquiries.
This procurement profile is built for plant owners and process engineers comparing production scope, controls, commissioning responsibility and lifecycle support. It organizes Ningbo Jingwei CNC Co., Ltd.'s published products, processes, certificate references and official sources around the primary topic “Ningbo Jingwei CNC SC-series digital cutting machines for composite.” The objective is to help a buyer decide whether to open a controlled RFQ, not to turn a broad company catalog into an unsupported approval.
Ningbo Jingwei CNC Co., Ltd. currently lists 10 product or service groups and 10 manufacturing or support capabilities in this reviewed record. The public scope indicates what to investigate, while the buyer remains responsible for drawings, design calculations, standards, current certificates, sample approval and order-specific commercial confirmation. Claims below are attributed to the attached source set unless GetFRP explicitly labels them as qualification guidance.
A composite-cutting inquiry should begin with real material and part data rather than a machine name. State whether the input is dry reinforcement, prepreg, cured laminate, board, film, foam, graphite or rubber; identify fiber and textile architecture, sizing or resin, backing or release paper, tack, hardness, single-ply thickness, total stack, usable width, roll diameter and mass. Provide the smallest and largest pieces, holes, slots and sharp corners, directional and nesting constraints, required dimensional tolerance, edge acceptance for fuzz, pulled fiber, delamination or resin drag, and the marking, kitting and traceability workflow. Routing cured carbon plate, epoxy board, graphite or rubber also requires the thickness, dust behavior, cutter, spindle speed, feed and surface criteria. A representative-material trial should record the CAD revision, nesting yield, tool, speed, acceleration, vacuum zones, environment, measured dimensions, repeatability, edge condition, takt, consumable life and recovery after interruption. Carbon-fiber dust is electrically conductive, so buyer and seller must define source capture, filtration, grounding, electrical segregation, safe cleaning, fire or explosion review and occupational-hygiene controls. Table hold-down vacuum is not automatically a qualified dust-extraction system. The RFQ should also lock the usable cutting area, conveyor and collection arrangement, roll handling, cutting heads and spares, vacuum and extraction boundary, supported CAD and nesting formats, licence and update terms, MES or ERP interfaces, user permissions, data ownership, remote access, guarding, safety sensing, emergency stops and destination compliance. FAT should use the agreed production material and demonstrate accuracy, repeatability, edge quality, throughput, utilization, tool life, alarms, restart and interlocks during sustained operation. SAT should confirm footprint, foundation, power, compressed air, vacuum, extraction, network, environment, installation, training and data exchange. Obtain the configuration BOM, layout, manuals, electrical drawings, control-program and parameter backups, software-renewal schedule, consumable and critical-spare prices, warranty exclusions, support response, export packing and Incoterm. Published accuracy or maximum-thickness figures must be tied to the exact model, tool, material and test condition; they are not universal guarantees for every composite. Carbon fiber, fiberglass, prepreg and the parts cut from them remain customer inputs or outputs, not JWEI product keywords.
No company-level certification is listed on this profile.
Evaluate Ningbo Jingwei CNC Co., Ltd. as a potential composite manufacturing equipment supplier for SC-series digital cutting machines for composite materials, verify the public evidence and prepare a comparable RFQ.
Ningbo Jingwei CNC Co., Ltd. includes this product in its published supply scope. Treat that listing as a starting point: request the current datasheet or drawing, material and construction, available grades or dimensions, guaranteed properties, production site, quotation revision and evidence that represents the exact item offered.
For CB03E-2516-RQ intelligent composite cutting system, buyers should convert the catalog description into an acceptance specification. Confirm standard and custom options, raw-material system, critical tolerances, surface or finish, test basis, sample route, MOQ, lead time and packing. Any alternative proposed by Ningbo Jingwei CNC Co., Ltd. should be identified explicitly rather than treated as automatically equivalent.
This product broadens the supplier's public portfolio, but GetFRP does not infer approval from a product name alone. Ask Ningbo Jingwei CNC Co., Ltd. for the grade or model designation, manufacturing route, current technical file, production and test location, batch traceability and the limits that apply to published performance values.
Ningbo Jingwei CNC Co., Ltd. publishes Customer-material, CAD-file and takt review as part of its capability scope. Buyers should ask which site and equipment perform the work, the practical size or material limits, the normal control records and whether the proposed order uses the same route. Subcontracted stages should be visible in the quality plan.
The relevance of Digital cutting of single-ply dry fabric and prepreg depends on the requested product and acceptance criteria. During qualification, request a process flow, critical control points, inspection or test method, operator or equipment qualification where applicable, nonconformance handling and a recent example that represents the offered production route.
For sourcing purposes, Knife cutting, creasing, plotting and routing is a capability signal rather than independent verification. Confirm capacity, tooling or fixture availability, setup and changeover assumptions, lot definition, sample approval and traceability. The quotation should identify any limitation that could affect geometry, performance, appearance or delivery.
Buyers evaluating Zoned vacuum hold-down and material restraint should connect the process claim to evidence: an equipment list, controlled procedure, representative report, production photograph or witnessed sample may each answer a different risk. Ningbo Jingwei CNC Co., Ltd. should also explain how the result is checked before release and recorded for the shipment.
These are sourcing contexts suggested by the published product scope, not confirmed project references. Validate the exact application, design basis and evidence in the RFQ.
Ningbo Jingwei CNC Co., Ltd.: The listed equipment can form part of a new production line, but machine selection should start from the product envelope, material system, throughput, utility and quality requirements. Ask the supplier to define every included station and the responsibility boundary for tooling, controls, guarding and downstream handling.
Ningbo Jingwei CNC Co., Ltd.: For an expansion project, the buyer should document interfaces with existing creels, molds, heaters, cutters, extraction, material handling and plant controls. A factory acceptance test should use representative materials and demonstrate the agreed output and quality measures rather than only showing that individual motors run.
Ningbo Jingwei CNC Co., Ltd.: Equipment value depends on installation, training, spares and troubleshooting after shipment. Confirm remote and on-site support, language, response time, software access, electrical documentation, consumables and the list of critical components that can be sourced in the destination market.
Ningbo Jingwei CNC Co., Ltd.'s source record currently includes JWEI Official Website, Composite Industry Solution, SC Composite Cutter, CB03E-2516-RQ Composite Brochure. These links let a buyer distinguish company-published information from GetFRP's own qualification guidance and return to the original context when a claim changes.
No company-level certification is presently listed in the reviewed profile. That does not prove that no document exists, but it means the RFQ should ask for the quality-system certificate and every product-specific test or approval needed by the buyer rather than assuming a certification from market reputation.
GetFRP last recorded a public-source review date of 2026-08-25. Public websites and catalogs can change after review, so commercial decisions should use newly downloaded files and direct supplier confirmation. GetFRP's public or claimed status describes profile ownership and identity controls; it does not certify every product statement or predict order performance.
Official product catalogs, web directories and technical guides published by the supplier.
Official company and digital-cutting entry point.
Open catalogOfficial composite cutting equipment and workflow page.
Open catalogOfficial SC-series composite cutter page.
Open catalogOfficial material, function and specification brochure.
Open catalogOfficial Ningbo address, phone and email.
Open catalogOrganizer source for the Ningbo Jingwei exhibitor.
Open catalog
Nanjing Haoli Hydraulic Equipment Co., Ltd. states that it was founded in 1999 and entered the composites field in 2000. Its current official catalog covers hydraulic, servo-hydraulic and caterpillar-puller pultrusion machines plus pultrusion-winding, resin-injection, automatic cut-off, mat-cutting, take-up, braided-pultrusion cable-conduit and die equipment. The China Composites Expo N directory supports the exhibitor identity and FRP pultrusion-equipment scope. Haoli sells the machinery, tooling and process support used to manufacture composite profiles. The website's statement that a machine can pull glass- or carbon-fiber sections describes compatible workpieces; it is not evidence that Haoli supplies carbon fiber, fiberglass, pultruded profiles, conduits or other finished composites. GetFRP therefore does not assign material or finished-product demand keywords to this equipment profile.
Nabertherm Ltd. (Shanghai), identified in Chinese exhibition material as Nabertherm's Shanghai industrial-furnace company, is the China sales-company entry published on the current Nabertherm website. The reviewed official navigation covers air-circulation and drying ovens, radiation-heated chamber furnaces, high-temperature solutions, protective-gas and vacuum systems, laboratory muffle and tube furnaces, debinding and sintering systems, melting and holding furnaces, custom furnace engineering and process-control documentation. The China Composites Expo N directory independently supports the Shanghai exhibitor identity. This is an equipment profile: carbon fiber, fiberglass, resin, ceramic, metal powder or any other workpiece processed in a furnace is not a material manufactured by Nabertherm. The exhibition category also is not evidence that the Shanghai entity offers composite-curing autoclaves, so GetFRP does not publish an autoclave product or inject material-product keywords.
Lianyungang Weide Composite Materials Facilities Co., Ltd. says on its current official website that it was established in 2001 and develops and manufactures composite-production equipment. The published range covers continuous-filament-winding FRP pipe lines, high-pressure hydrogen-cylinder winding lines, four-axis and horizontal winding machines, high-pressure epoxy-pipe lines, centrifugal-casting GRP pipe lines, lighting-pole lines and supporting manipulators, curing ovens, resin-supply, intelligent feeding, conveying, joint-making and quality-assurance systems. China Composites Expo's L directory lists the matching exhibitor. Weide sells the machinery used to make pipes, cylinders and poles; those outputs are not presented as Weide-manufactured FRP or carbon-fiber products. GetFRP therefore excludes reinforcement, FRP-pipe and finished-cylinder supplier keywords. Capacity, performance, import-substitution, service-life and mechanical-property statements are supplier claims that must be validated against the quoted configuration, representative trials, FAT, SAT and contractual acceptance records.