Shanghai TRONXT New Material Technology is presented as a source-reviewed supplier profile centered on Automated HP-RTM preforming machines, with company-published capability separated from buyer-side verification requirements.
Shanghai TRONXT New Material Technology Co., Ltd. is a mainland-China supplier of intelligent composite-forming equipment and automated production lines. Its current official website operates under the Shanghai legal entity and publishes a Jinshan manufacturing address, a Taicang delivery address, Shanghai ICP filing, company contacts and news updated into 2026. The site dates the TRONXT business lineage to 2017 while its timeline places company establishment in 2018; this profile uses the published 2017 brand start and advises buyers to confirm the legal incorporation date from the current business licence. The range covers seven equipment families: HP-RTM preforming, CFRTP, WCM, PCM, STM, thermoplastic-sheet overmoulding, and automated cutting and sorting, plus composite manufacturing information systems. China Composites Expo lists the matching business as TRONXT, and the 2026 exhibitor list publishes SHANGHAI TRONXT NEW MATERIAL TECHNOLOGY CO., LTD. at booth 6J12. This page deduplicates the brand shorthand and Chinese/English legal identity as one Shanghai supplier without separately merging the Taicang entity established in 2025.
Is this your business?
Register or sign in to claim your company, update this public profile and respond to buyer inquiries.
This procurement profile is built for plant owners and process engineers comparing production scope, controls, commissioning responsibility and lifecycle support. It organizes Shanghai TRONXT New Material Technology Co., Ltd.'s published products, processes, certificate references and official sources around the primary topic “Shanghai TRONXT New Material Technology Automated HP-RTM preforming machines.” The objective is to help a buyer decide whether to open a controlled RFQ, not to turn a broad company catalog into an unsupported approval.
Shanghai TRONXT New Material Technology Co., Ltd. currently lists 8 product or service groups and 8 manufacturing or support capabilities in this reviewed record. The public scope indicates what to investigate, while the buyer remains responsible for drawings, design calculations, standards, current certificates, sample approval and order-specific commercial confirmation. Claims below are attributed to the attached source set unless GetFRP explicitly labels them as qualification guidance.
TRONXT publishes seven equipment families. Its HP-RTM preforming cell links multilayer-fabric unwinding, cutting, welding, heating, preforming and trimming. The CFRTP cell combines loading tables, infrared heating, robots, a servo press, mould-temperature control and line controls. WCM covers handling, resin application, heating, pressing and cooling after dry-fabric cutting; PCM covers prepreg cutting, film removal, lay-up, pressing and cooling; STM covers unwinding, cutting, polyurethane spraying, release-agent application, press curing and unloading. The thermoplastic overmoulding cell links sheet loading, preheating, rapid transfer, injection moulding and unloading. The cutting and sorting system combines an automatic cutter, robot or gantry, centring table and unloading station for prepreg, woven fabric, film and other flexible materials. An RFQ should go beyond a process acronym: provide part CAD, material system, dry fabric, prepreg or thermoplastic-sheet grade and width, ply count and lay-up, resin mixing and metering, takt time, annual volume, OEE, scrap target, and cleanroom or climate requirements. Define press force, stroke and platen; mould interface; heating power and uniformity; transfer time; robot payload, reach and accuracy; vision and functional-safety targets; PLC and robot preferences; communications; MES or SCADA integration; data ownership and cybersecurity. The technical agreement should define FAT and SAT parts, continuous-run duration, capability metrics, acceptance gauges and tests, wear parts, spares, utilities, foundations, packing, installation, commissioning, training, document language, software licensing, remote support, response time, warranty and lifecycle service. For aerospace, automotive or other controlled programs, confirm export-control, end-user, end-use and technical-data-transfer restrictions. The site states that the company passed ISO 9001 in 2022, but the reviewed pages do not expose a certificate with complete legal entity, number, scope, issuer and current validity, so it is not recorded here as verified. Customer, order, 3,000 m² and 30-plus employee figures are company-published claims to be checked through contract scope, equipment registers, site audit and customer-authorized evidence.
No company-level certification is listed on this profile.
Evaluate Shanghai TRONXT New Material Technology Co., Ltd. as a potential composite manufacturing equipment supplier for Automated HP-RTM preforming machines, verify the public evidence and prepare a comparable RFQ.
Shanghai TRONXT New Material Technology Co., Ltd. includes this product in its published supply scope. Treat that listing as a starting point: request the current datasheet or drawing, material and construction, available grades or dimensions, guaranteed properties, production site, quotation revision and evidence that represents the exact item offered.
For CFRTP thermoplastic-sheet compression-moulding cells, buyers should convert the catalog description into an acceptance specification. Confirm standard and custom options, raw-material system, critical tolerances, surface or finish, test basis, sample route, MOQ, lead time and packing. Any alternative proposed by Shanghai TRONXT New Material Technology Co., Ltd. should be identified explicitly rather than treated as automatically equivalent.
This product broadens the supplier's public portfolio, but GetFRP does not infer approval from a product name alone. Ask Shanghai TRONXT New Material Technology Co., Ltd. for the grade or model designation, manufacturing route, current technical file, production and test location, batch traceability and the limits that apply to published performance values.
Shanghai TRONXT New Material Technology Co., Ltd. publishes Composite automation-line design and process integration as part of its capability scope. Buyers should ask which site and equipment perform the work, the practical size or material limits, the normal control records and whether the proposed order uses the same route. Subcontracted stages should be visible in the quality plan.
The relevance of Fabric unwinding, cutting, welding and preforming depends on the requested product and acceptance criteria. During qualification, request a process flow, critical control points, inspection or test method, operator or equipment qualification where applicable, nonconformance handling and a recent example that represents the offered production route.
For sourcing purposes, Dry-fabric resin application, handling, pressing and cooling is a capability signal rather than independent verification. Confirm capacity, tooling or fixture availability, setup and changeover assumptions, lot definition, sample approval and traceability. The quotation should identify any limitation that could affect geometry, performance, appearance or delivery.
Buyers evaluating Prepreg cutting, film removal, lay-up and compression moulding should connect the process claim to evidence: an equipment list, controlled procedure, representative report, production photograph or witnessed sample may each answer a different risk. Shanghai TRONXT New Material Technology Co., Ltd. should also explain how the result is checked before release and recorded for the shipment.
These are sourcing contexts suggested by the published product scope, not confirmed project references. Validate the exact application, design basis and evidence in the RFQ.
Shanghai TRONXT New Material Technology Co., Ltd.: The listed equipment can form part of a new production line, but machine selection should start from the product envelope, material system, throughput, utility and quality requirements. Ask the supplier to define every included station and the responsibility boundary for tooling, controls, guarding and downstream handling.
Shanghai TRONXT New Material Technology Co., Ltd.: For an expansion project, the buyer should document interfaces with existing creels, molds, heaters, cutters, extraction, material handling and plant controls. A factory acceptance test should use representative materials and demonstrate the agreed output and quality measures rather than only showing that individual motors run.
Shanghai TRONXT New Material Technology Co., Ltd.: Equipment value depends on installation, training, spares and troubleshooting after shipment. Confirm remote and on-site support, language, response time, software access, electrical documentation, consumables and the list of critical components that can be sourced in the destination market.
Shanghai TRONXT New Material Technology Co., Ltd.'s source record currently includes Official Shanghai TRONXT Website, Official TRONXT Company Profile, Official TRONXT Composite Equipment Directory, Official TRONXT Contact Page. These links let a buyer distinguish company-published information from GetFRP's own qualification guidance and return to the original context when a claim changes.
No company-level certification is presently listed in the reviewed profile. That does not prove that no document exists, but it means the RFQ should ask for the quality-system certificate and every product-specific test or approval needed by the buyer rather than assuming a certification from market reputation.
GetFRP last recorded a public-source review date of 2026-08-13. Public websites and catalogs can change after review, so commercial decisions should use newly downloaded files and direct supplier confirmation. GetFRP's public or claimed status describes profile ownership and identity controls; it does not certify every product statement or predict order performance.
Official product catalogs, web directories and technical guides published by the supplier.
Shanghai identity, equipment, applications, news and contacts.
Open catalogCompany history, sites, team and claimed project experience.
Open catalogSeven automated forming, cutting and sorting equipment families.
Open catalogShanghai and Taicang addresses, telephone, email and inquiry form.
Open catalogOrganizer-published brand shorthand, technology scope and categories.
Open catalogLists the English Shanghai legal identity and booth 6J12.
Open catalog
Nanjing Haoli Hydraulic Equipment Co., Ltd. states that it was founded in 1999 and entered the composites field in 2000. Its current official catalog covers hydraulic, servo-hydraulic and caterpillar-puller pultrusion machines plus pultrusion-winding, resin-injection, automatic cut-off, mat-cutting, take-up, braided-pultrusion cable-conduit and die equipment. The China Composites Expo N directory supports the exhibitor identity and FRP pultrusion-equipment scope. Haoli sells the machinery, tooling and process support used to manufacture composite profiles. The website's statement that a machine can pull glass- or carbon-fiber sections describes compatible workpieces; it is not evidence that Haoli supplies carbon fiber, fiberglass, pultruded profiles, conduits or other finished composites. GetFRP therefore does not assign material or finished-product demand keywords to this equipment profile.
Nabertherm Ltd. (Shanghai), identified in Chinese exhibition material as Nabertherm's Shanghai industrial-furnace company, is the China sales-company entry published on the current Nabertherm website. The reviewed official navigation covers air-circulation and drying ovens, radiation-heated chamber furnaces, high-temperature solutions, protective-gas and vacuum systems, laboratory muffle and tube furnaces, debinding and sintering systems, melting and holding furnaces, custom furnace engineering and process-control documentation. The China Composites Expo N directory independently supports the Shanghai exhibitor identity. This is an equipment profile: carbon fiber, fiberglass, resin, ceramic, metal powder or any other workpiece processed in a furnace is not a material manufactured by Nabertherm. The exhibition category also is not evidence that the Shanghai entity offers composite-curing autoclaves, so GetFRP does not publish an autoclave product or inject material-product keywords.
Lianyungang Weide Composite Materials Facilities Co., Ltd. says on its current official website that it was established in 2001 and develops and manufactures composite-production equipment. The published range covers continuous-filament-winding FRP pipe lines, high-pressure hydrogen-cylinder winding lines, four-axis and horizontal winding machines, high-pressure epoxy-pipe lines, centrifugal-casting GRP pipe lines, lighting-pole lines and supporting manipulators, curing ovens, resin-supply, intelligent feeding, conveying, joint-making and quality-assurance systems. China Composites Expo's L directory lists the matching exhibitor. Weide sells the machinery used to make pipes, cylinders and poles; those outputs are not presented as Weide-manufactured FRP or carbon-fiber products. GetFRP therefore excludes reinforcement, FRP-pipe and finished-cylinder supplier keywords. Capacity, performance, import-substitution, service-life and mechanical-property statements are supplier claims that must be validated against the quoted configuration, representative trials, FAT, SAT and contractual acceptance records.