Shenzhen Hongfu Tongxin Technology is presented as a source-reviewed supplier profile centered on Embossed FRP Panels, with company-published capability separated from buyer-side verification requirements.
Shenzhen Hongfu Tongxin Technology Co., Ltd. describes itself on its official website as a manufacturer of fiberglass and plastic products and also uses the FORE / Foreth Industrial brand identity. The company publishes an FRP production factory in Dongguan and a separate plastic-sheet extrusion and vacuum-forming factory in Foshan. Its listed FRP range includes flat sheets, sandwich panels, molded grating, pultruded profiles, roofing sheets and SMC/BMC manhole covers, while the published commercial contact address is in Shenzhen, Guangdong.
Is this your business?
Register or sign in to claim your company, update this public profile and respond to buyer inquiries.
This procurement profile is built for engineering and procurement teams comparing a finished FRP or composite component against a controlled drawing, service condition and inspection plan. It organizes Shenzhen Hongfu Tongxin Technology Co., Ltd.'s published products, processes, certificate references and official sources around the primary topic “Shenzhen Hongfu Tongxin Technology Embossed FRP Panels.” The objective is to help a buyer decide whether to open a controlled RFQ, not to turn a broad company catalog into an unsupported approval.
Shenzhen Hongfu Tongxin Technology Co., Ltd. currently lists 6 product or service groups and 6 manufacturing or support capabilities in this reviewed record. The public scope indicates what to investigate, while the buyer remains responsible for drawings, design calculations, standards, current certificates, sample approval and order-specific commercial confirmation. Claims below are attributed to the attached source set unless GetFRP explicitly labels them as qualification guidance.
The official factory-capability page lists one 80-meter FRP sheet line, two sandwich-panel vacuum presses, 11 grating molding machines, eight pultrusion machines, one 50-meter roofing-sheet line and eight SMC/BMC presses, and states that the FRP factory covers 30,000 m². The company history says the business began with hand-lay-up fiberglass products before developing a mechanized sheet line, and now supports material supply plus OEM/ODM processing for cold-chain vehicles, RVs, wall panels, radomes and equipment housings. These capacity, equipment, factory-area and performance statements are company-published. Buyers should confirm the contracting entity, the Dongguan production address, resin and reinforcement system, panel core and adhesive, dimensional tolerances, surface quality, fire or mechanical test reports, batch inspection, MOQ, lead time, packaging and warranty during RFQ and factory qualification.
No company-level certification is listed on this profile.
Evaluate Shenzhen Hongfu Tongxin Technology Co., Ltd. as a potential composite product manufacturer for Smooth, gel-coated and embossed FRP flat sheets, verify the public evidence and prepare a comparable RFQ.
Shenzhen Hongfu Tongxin Technology Co., Ltd. includes this product in its published supply scope. Treat that listing as a starting point: request the current datasheet or drawing, material and construction, available grades or dimensions, guaranteed properties, production site, quotation revision and evidence that represents the exact item offered.
For FRP sandwich panels for refrigerated trucks, RVs, vehicle bodies and walls, buyers should convert the catalog description into an acceptance specification. Confirm standard and custom options, raw-material system, critical tolerances, surface or finish, test basis, sample route, MOQ, lead time and packing. Any alternative proposed by Shenzhen Hongfu Tongxin Technology Co., Ltd. should be identified explicitly rather than treated as automatically equivalent.
This product broadens the supplier's public portfolio, but GetFRP does not infer approval from a product name alone. Ask Shenzhen Hongfu Tongxin Technology Co., Ltd. for the grade or model designation, manufacturing route, current technical file, production and test location, batch traceability and the limits that apply to published performance values.
A useful RFQ for Pultruded FRP rods, tubes, channels, beams and custom profiles should describe the buyer's application without disclosing unnecessary proprietary detail, then state the measurable product requirements. Compare Shenzhen Hongfu Tongxin Technology Co., Ltd.'s response against the same dimensions, quantity, inspection, documentation, Incoterm and delivery assumptions used for every shortlisted supplier.
Shenzhen Hongfu Tongxin Technology Co., Ltd. publishes Continuous mechanized FRP sheet production as part of its capability scope. Buyers should ask which site and equipment perform the work, the practical size or material limits, the normal control records and whether the proposed order uses the same route. Subcontracted stages should be visible in the quality plan.
The relevance of Vacuum pressing of FRP sandwich panels depends on the requested product and acceptance criteria. During qualification, request a process flow, critical control points, inspection or test method, operator or equipment qualification where applicable, nonconformance handling and a recent example that represents the offered production route.
For sourcing purposes, Molded FRP grating production is a capability signal rather than independent verification. Confirm capacity, tooling or fixture availability, setup and changeover assumptions, lot definition, sample approval and traceability. The quotation should identify any limitation that could affect geometry, performance, appearance or delivery.
Buyers evaluating FRP profile pultrusion should connect the process claim to evidence: an equipment list, controlled procedure, representative report, production photograph or witnessed sample may each answer a different risk. Shenzhen Hongfu Tongxin Technology Co., Ltd. should also explain how the result is checked before release and recorded for the shipment.
These are sourcing contexts suggested by the published product scope, not confirmed project references. Validate the exact application, design basis and evidence in the RFQ.
Shenzhen Hongfu Tongxin Technology Co., Ltd.'s listed grating or platform products may be relevant to industrial access systems. Qualification should identify molded or pultruded construction, resin, panel and mesh geometry, surface, support span, load and deflection limit, cut plan, clips, fire or smoke requirement and the test basis behind any published load table.
Shenzhen Hongfu Tongxin Technology Co., Ltd.'s listed transport sheets can be screened for refrigerated trucks, dry vans, RVs, buses or other vehicle bodies. The RFQ should state the skin and core construction, sheet or roll dimensions, surface class, color, UV exposure, adhesive and lamination route, thermal requirement, impact and peel evidence, fabrication details, annual volume and protective packing for cosmetic panels.
Shenzhen Hongfu Tongxin Technology Co., Ltd.'s reinforcement range can be screened for laminating, pultrusion, winding, molding or conversion programs. Buyers should confirm grade, sizing, architecture, width, tex or areal weight, package, splice and moisture limits, then run a representative processing trial before approving the material for repeat production.
Shenzhen Hongfu Tongxin Technology Co., Ltd.'s source record currently includes Hongfu Tongxin Company Profile, Company History & Process Development, FRP Factory Capabilities, FRP Product Directory. These links let a buyer distinguish company-published information from GetFRP's own qualification guidance and return to the original context when a claim changes.
No company-level certification is presently listed in the reviewed profile. That does not prove that no document exists, but it means the RFQ should ask for the quality-system certificate and every product-specific test or approval needed by the buyer rather than assuming a certification from market reputation.
GetFRP last recorded a public-source review date of 2026-08-05. Public websites and catalogs can change after review, so commercial decisions should use newly downloaded files and direct supplier confirmation. GetFRP's public or claimed status describes profile ownership and identity controls; it does not certify every product statement or predict order performance.
F1 Composite is the international composites brand of Chongqing Yaoyi New Material Technology Co., Ltd. It supplies pultruded FRP profiles, gratings, fiberglass window and door systems, and custom pultrusions for overseas projects, with English-language engineering, contracting, quality documentation, export paperwork and international delivery support.
Chongqing Dujiang Composites Co., Ltd. states that the current company name was adopted in 2002 and traces its fiberglass and FRP operating history to 1980. Its published catalog spans fiberglass reinforcements, thermoset resins, FRP profiles, carbon- and aramid-fiber materials, and related auxiliaries. The company reports 289 employees, approximately 50,000 m² of plant space, one-stop sourcing and OEM/ODM services. Its official sites publish a Yubei office address and a separate Beibei production address; buyers should verify the contracting entity, actual production site, product origin and quality-responsibility chain through the business license, factory audit and order-specific documents.
SPARE's Chinese website presents the business as Nanjing Spare New Materials Co., Ltd., while its official English export site operates under the Nanjing Spare Composites brand and names Nanjing Spare Composites Yizheng Co., Ltd. in the site footer. The company's published history says Nanjing Spare was founded in May 1995 and the Yizheng company was established in 2011. Its public product scope centers on pultruded glass-fiber composite profiles, gratings, bridge and infrastructure components, with custom development, machining, testing and installation support.
Official product catalogs, web directories and technical guides published by the supplier.
Official overview of the company identity, Dongguan FRP factory, Foshan plastics factory and project support.
Open catalogOfficial history of hand lay-up production, mechanized FRP sheet development and OEM/ODM services.
Open catalogCompany-published plant area and sheet, sandwich-panel, grating, pultrusion, roofing and molding equipment.
Open catalogOfficial directory for FRP sheets, sandwich panels, grating, profiles, roofing and manhole covers.
Open catalogOfficial range of smooth, gel-coated and embossed FRP sheets for vehicle and wall applications.
Open catalogOfficial range of foam- and honeycomb-core FRP sandwich panels for vehicle, cold-chain and wall applications.
Open catalogOfficial Shenzhen commercial address, telephone, email and published sales contacts.
Open catalog