Zhejiang Huafeng New Material is a source-reviewed supplier profile for fiberglass reinforced pipe, FRP pipe, and fiberglass pipe, with every search topic tied to company-published product or process evidence and separated from buyer-side verification requirements.
Zhejiang Huafeng New Material Co., Ltd. states on its official English website that it has developed, manufactured and sold new piping materials since 1998 and is headquartered in Hangzhou, Zhejiang. Its published range includes continuously wound GRP mortar and pressure pipe, GRP jacking pipe, water-supply, drainage and sewer pipe, FRP ductwork, flanges, tees, elbows, sleeves and manholes, plus communication and power cable protection pipe for municipal water, water infrastructure, petrochemical, marine and trenchless projects.
The reviewed product and process scope makes this supplier relevant to buyer searches for fiberglass reinforced pipe, FRP pipe, fiberglass pipe, and fiberglass pipe supplier. These phrases describe products or processes supported by the cited public scope; they do not expand the supplier's catalog or replace technical qualification.
Is this your business?
Register or sign in to claim your company, update this public profile and respond to buyer inquiries.
This procurement profile is built for engineering and procurement teams comparing a finished FRP or composite component against a controlled drawing, service condition and inspection plan. It organizes Zhejiang Huafeng New Material Co., Ltd.'s published products, processes, certificate references and official sources around the primary topic “Zhejiang Huafeng New Material Continuous-Wound GRP Pipe.” The objective is to help a buyer decide whether to open a controlled RFQ, not to turn a broad company catalog into an unsupported approval.
Zhejiang Huafeng New Material Co., Ltd. currently lists 6 product or service groups and 6 manufacturing or support capabilities in this reviewed record. The public scope indicates what to investigate, while the buyer remains responsible for drawings, design calculations, standards, current certificates, sample approval and order-specific commercial confirmation. Claims below are attributed to the attached source set unless GetFRP explicitly labels them as qualification guidance.
Huafeng states that its site covers approximately 80,000 m², operates five continuous-winding GRP pipe lines with annual pipe capacity of about 60,000 tonnes, and includes a provincial R&D center and professional testing laboratory. Published GRP/FRP pipe specifications span DN300–DN4000 and use resin, continuous and chopped glass fiber, and quartz sand. The site also lists integrated GRP sleeves, rubber-sealed sleeve systems, flanges, elbows, tees and manholes. These scale, capacity, standards and certification statements are company-published. Buyers should validate the resin system, diameter and wall thickness, PN pressure class, SN ring stiffness, joint type, liner, potable-water or chemical-service requirement, design-life basis, applicable standard, type and batch testing, current certificates, project references, MOQ, lead time, packaging, installation support and warranty for the quoted system.
Evaluate Zhejiang Huafeng New Material Co., Ltd. as a potential composite product manufacturer for fiberglass reinforced pipe, verify the public evidence and prepare a comparable RFQ.
Zhejiang Huafeng New Material Co., Ltd. includes this product in its published supply scope. Treat that listing as a starting point: request the current datasheet or drawing, material and construction, available grades or dimensions, guaranteed properties, production site, quotation revision and evidence that represents the exact item offered.
For GRP jacking pipe and pressure jacking pipe, buyers should convert the catalog description into an acceptance specification. Confirm standard and custom options, raw-material system, critical tolerances, surface or finish, test basis, sample route, MOQ, lead time and packing. Any alternative proposed by Zhejiang Huafeng New Material Co., Ltd. should be identified explicitly rather than treated as automatically equivalent.
This product broadens the supplier's public portfolio, but GetFRP does not infer approval from a product name alone. Ask Zhejiang Huafeng New Material Co., Ltd. for the grade or model designation, manufacturing route, current technical file, production and test location, batch traceability and the limits that apply to published performance values.
A useful RFQ for FRP ductwork and industrial fluid piping should describe the buyer's application without disclosing unnecessary proprietary detail, then state the measurable product requirements. Compare Zhejiang Huafeng New Material Co., Ltd.'s response against the same dimensions, quantity, inspection, documentation, Incoterm and delivery assumptions used for every shortlisted supplier.
Zhejiang Huafeng New Material Co., Ltd. publishes Continuous winding of GRP mortar pipe as part of its capability scope. Buyers should ask which site and equipment perform the work, the practical size or material limits, the normal control records and whether the proposed order uses the same route. Subcontracted stages should be visible in the quality plan.
The relevance of Automated proportioning of resin, continuous glass fiber, chopped fiber and quartz sand depends on the requested product and acceptance criteria. During qualification, request a process flow, critical control points, inspection or test method, operator or equipment qualification where applicable, nonconformance handling and a recent example that represents the offered production route.
For sourcing purposes, Hoop winding, curing and cut-to-length finishing is a capability signal rather than independent verification. Confirm capacity, tooling or fixture availability, setup and changeover assumptions, lot definition, sample approval and traceability. The quotation should identify any limitation that could affect geometry, performance, appearance or delivery.
Buyers evaluating GRP fitting and fiberglass manhole manufacture should connect the process claim to evidence: an equipment list, controlled procedure, representative report, production photograph or witnessed sample may each answer a different risk. Zhejiang Huafeng New Material Co., Ltd. should also explain how the result is checked before release and recorded for the shipment.
These are sourcing contexts suggested by the published product scope, not confirmed project references. Validate the exact application, design basis and evidence in the RFQ.
Zhejiang Huafeng New Material Co., Ltd.'s public scope suggests a potential route for piping, tanks or corrosion-resistant process equipment. The RFQ should define service chemistry, temperature, pressure or stiffness class, liner, structural wall, joints, supports, nozzles, inspection and transport. Project-specific design and evidence remain necessary before the supplier can be treated as a fit.
Zhejiang Huafeng New Material Co., Ltd.'s published wall-panel scope may be relevant to commercial interiors, food-processing spaces, hospitals, laboratories and other cleanable surfaces. Buyers should define the resin and gel coat, reinforcement construction, thickness and flatness tolerance, joint and trim system, cleaning chemicals, color and texture, fire or hygiene evidence, substrate preparation and installation responsibility for the complete wall or ceiling assembly.
Zhejiang Huafeng New Material Co., Ltd.'s reinforcement range can be screened for laminating, pultrusion, winding, molding or conversion programs. Buyers should confirm grade, sizing, architecture, width, tex or areal weight, package, splice and moisture limits, then run a representative processing trial before approving the material for repeat production.
Zhejiang Huafeng New Material Co., Ltd.'s source record currently includes Huafeng Official English Website, Huafeng Company Profile, GRP/FRP Pipe Product Directory, GRP/FRP Pipe Fitting Directory. These links let a buyer distinguish company-published information from GetFRP's own qualification guidance and return to the original context when a claim changes.
The profile lists 4 company-published certification or test references. A listing is not the same as validation: request the complete current document, issuer, legal holder, production site, product and grade scope, standard edition, report specimen and validity date before citing it in a project or purchase order.
GetFRP last recorded a public-source review date of 2026-08-05. Public websites and catalogs can change after review, so commercial decisions should use newly downloaded files and direct supplier confirmation. GetFRP's public or claimed status describes profile ownership and identity controls; it does not certify every product statement or predict order performance.
Official product catalogs, web directories and technical guides published by the supplier.
Official overview of the company, principal products, applications, R&D and export contacts.
Open catalogOfficial company history and published production-line, capacity, R&D and qualification information.
Open catalogOfficial directory for GRP/FRP pipe, jacking pipe, water, drainage, sewer and ductwork products.
Open catalogOfficial directory for GRP flanges, tees, elbows, sleeves, couplings and fiberglass manholes.
Open catalogCompany-published management-system, product-standard, test and qualification documents.
Open catalogCompany-published municipal, water, marine, industrial and trenchless project references.
Open catalog
Jiangsu Aosheng Composite Materials Technology Co., Ltd. is a Suzhou-based carbon-composite company whose current corporate website and 2026 China Composites Expo listing support carbon-fiber woven and hybrid fabrics, prepreg, wind-blade pultruded plate and composite application development. The official site also presents automotive, sports, hydrogen, aviation and overseas footprints under the Aosheng group. GetFRP therefore assigns measured-demand phrases such as carbon fiber fabric, carbon fiber plate, pultruded, resin infusion and vacuum infusion only where a published product or manufacturing route supports them. Fishing rods may be an end use of prepreg, but they are not listed here as an Aosheng finished product. Likewise, automotive parts, sports products and hydrogen cylinders are marked as group-sector inquiries rather than automatically attributed to the Jiangsu parent factory. Buyers must confirm the exact legal entity, production site and specification behind a quotation. Awards, customer relationships, capacity, CNAS, patent and standards-participation statements on the website remain company claims, not GetFRP verification.
Nanjing Hitech Composites Co., Ltd. publishes an integrated HICOMA and Lica offer spanning pultruded carbon- and glass-fiber profiles, high-performance reinforcement fabrics and structural adhesives. Its current official catalog explicitly lists carbon-fiber plate, rod, tube, channel, rebar and prestressed plate systems; fiberglass beams, channels, angles, tubes, plates, rebar and grating; carbon- and glass-fiber fabrics; and bonding products for wind blades, carbon plate and civil structures. The China Composites Expo directory independently supports the Nanjing exhibitor identity and its pultruded-composite and epoxy-adhesive scope. GetFRP therefore assigns only demand phrases supported by those actual products, including carbon-fiber products, plates, rods, tubes and fabrics, pultruded fiberglass profiles and fiberglass grating. An application, system or performance label is not treated as a substitute for the offered grade, section drawing, laminate architecture, adhesive TDS or project engineering.
Jiangsu Changhai Composite Materials Holding Co., Ltd. is a Changzhou supplier of glass-fiber reinforcement and thermoplastic composite materials. Its current official catalog and the 2026 China Composites Expo directory support roving, chopped strands, chopped strand mat, surface and continuous mat, woven roving, biaxial and stitched combinations, mesh, LFT reinforcement, CFRT tape and glass-reinforced thermoplastic panels. GetFRP assigns measured-demand phrases such as chopped strand mat, fiberglass cloth, fiberglass mat, fiberglass chopped strand mat and fiberglass panels only to these published products. The thermoplastic honeycomb offer is described as a core with continuous-glass-fiber-reinforced CFRT skins, not as a solid fiberglass panel or a claim that every honeycomb grade contains glass. Product-specific roving end uses do not mean Changhai manufactures the customer's finished pipe, SMC part or pultruded profile. The complete current logo was downloaded on 2026-08-26 from the exact CDN asset referenced by the official header, trimmed only to remove transparent canvas, and stored locally by GetFRP. Capacity, market-position and certification statements remain company claims pending certificate- and plant-level verification.