1. Who makes glass fiber in China: output, capacity and the big three
China's glass fiber industry is a tank-furnace oligopoly. The China Glass Fiber Industry Association (CGFIA) counted 8.43 million tonnes of yarn output in 2025, up 11.5% after two years of low growth, of which tank-furnace yarn was 8.12 million tonnes, up 11.8% [statistic] [S1] [S2]. Seven new large furnaces and three cold-repaired furnaces fired up during the year, adding 860,000 tonnes of capacity [statistic] [S2]. By mid-2026 total capacity stood near 9.3 million tonnes with 8.65 million tonnes in production, and first-half 2026 output grew a slower 7.9% [statistic] [S5]. Output has compounded at 8.82% a year since 2016 [statistic] [S1].
Concentration is the defining fact for a buyer. Jushi's annual report puts six producers, Jushi, Taishan Fiberglass, Chongqing Polycomp International (CPIC), Owens Corning, Nippon Electric Glass and Shandong Fiberglass, at about 70% of global capacity, and China's three leaders at about 70% of domestic capacity [company] [S1]. Jushi sold 3.20 million tonnes of roving and products plus 1.062 billion meters of electronic cloth in 2025 on revenue of RMB 18.88 billion, up 19.1%, from four Chinese bases and plants in Suez, Egypt and South Carolina, USA [company] [S1]. Taishan, the glass fiber arm of Sinoma Science and Technology, sold 1.37 million tonnes from more than 1.7 million tonnes per year of capacity after its Taiyuan lines started [company] [S3]. CPIC sold 1.18 million tonnes on revenue of RMB 8.66 billion and runs bases in Bahrain and Brazil [company] [S2].
The Western benchmark has changed hands. Owens Corning completed the sale of its glass reinforcements business to Praana Group on 1 May 2026 at an enterprise value of USD 645 million [company] [S40], so an Advantex or Owens Corning-branded roving now comes from a different corporate owner than it did in 2025. Chinese producers, by contrast, are still adding lines: Jushi is building a 200,000-tonne high-performance line in Chengdu and a 100,000-tonne electronic yarn line in Huai'an, and is cold-repairing two Tongxiang furnaces [company] [S1] [S4].
The 2025 output mix shows where the growth went. High-modulus wind yarn reached 1.436 million tonnes and thermoplastic yarn 1.843 million tonnes, while ordinary thermoset direct roving, the feedstock of pultrusion, filament winding and most open molding, was 2.513 million tonnes [statistic] [S1]. Domestic apparent consumption of thermoset reinforcement yarn rose 22.6% to 3.797 million tonnes [statistic] [S1].

↔ Scroll horizontally to see the full chart and data table.
Source: China Glass Fiber Industry Association 2025 statistics as reprinted in the China Jushi and CPIC 2025 annual reports. The six categories reported by the association add up to the 8.43 Mt national total.
View the chart data and evidence
| Series | Category | Value | Unit | Evidence / value basis | Reported range | Point note |
|---|---|---|---|---|---|---|
| — | Thermoset direct roving | 2.513 | Mt | Statistic | — | — |
| — | Thermoplastic yarn | 1.843 | Mt | Statistic | — | — |
| — | High-modulus (wind) yarn | 1.436 | Mt | Statistic | — | — |
| — | Assembled roving | 1.101 | Mt | Statistic | — | — |
| — | Electronic yarn | 0.886 | Mt | Statistic | — | — |
| — | Industrial yarn | 0.651 | Mt | Statistic | — | — |
↔ Scroll horizontally to see the full chart and data table.
Source: China Jushi, Sinoma Science and Technology and CPIC 2025 annual reports. Jushi reports roving and products (plus 1.062 bn m of electronic cloth); Taishan 1.024 Mt of yarn plus 0.344 Mt of products; CPIC 1.177 Mt of glass fiber and products. Scopes differ slightly and the figures are not summed.
View the chart data and evidence
| Series | Category | Value | Unit | Evidence / value basis | Reported range | Point note |
|---|---|---|---|---|---|---|
| — | China Jushi | 3.2 | Mt | Company data | — | — |
| — | Taishan (Sinoma S&T) | 1.37 | Mt | Company data | — | — |
| — | CPIC | 1.18 | Mt | Company data | — | — |
| Producer | 2025 volume and scale | Plants | What to source there | Profile |
|---|---|---|---|---|
| China Jushi (CNBM) | 3.20 Mt roving and products; revenue RMB 18.88 bn; gross margin on glass fiber 32.2% | Tongxiang, Jiujiang, Chengdu, Huai'an; Suez (Egypt); South Carolina (USA) | E6 boron-free roving, E7/E8/E9 high-modulus wind yarn, SMC, mat, woven roving, electronic cloth | View profile |
| Taishan Fiberglass (Sinoma Science and Technology) | 1.37 Mt sold; capacity above 1.7 Mt/yr; revenue RMB 8.9 bn | Taiyuan base (started 2025) and other Chinese plants | Thermoset and thermoplastic yarn, LFT yarn, wind multiaxials, low-Dk and low-CTE cloth | View profile |
| Chongqing Polycomp International (CPIC) | 1.18 Mt sold; revenue RMB 8.66 bn; above 25% share in wind yarn and fabrics | Chongqing; Bahrain; Brazil | TM high-modulus wind yarn, thermoplastic chopped strand, PU-compatible wind yarn, LDK electronic yarn | View profile |
| PGTEX China (CPIC group) | Named exporter in the EU fabric cases (37.6% AD, 17.0% CVD) | Changzhou | Stitched multiaxial glass and carbon fabrics | View profile |
| Shandong Fiberglass | One of the six groups holding about 70% of global capacity | Shandong | Direct roving and chopped strand | — |
| Owens Corning reinforcements, now Praana Group | Sold 1 May 2026 at USD 645 m enterprise value | Global network | Advantex E-CR benchmark grades | — |
Source: Company annual reports, EU Implementing Regulations 2026/1203 and 2026/1928, Owens Corning release. 'Profile' opens a GetFRP supplier page where one exists.
2. Glass fiber price in China 2026: roving flat, electronic yarn at a record
Commodity roving has recovered only modestly from the 2023 to 2024 trough. Sublime China Information (SCI) put the national average for 2400 tex E-glass winding direct roving at RMB 3,781 per tonne in the second quarter of 2026, up 1% year on year and 5% on the quarter, and the end-June and mid-September averages at RMB 3,791 and 3,732, up 3.1% and 5.9% year on year [statistic] [S4] [S5]. These are delivered, VAT-inclusive averages for standard grades; high-modulus wind yarn and thermoplastic chopped strand sell above them, and medium-alkali yarn below. For comparison, Caitong Securities' glass fiber price series peaked at RMB 7,008 per tonne in November 2021 [statistic] [S5].
The two leaders' accounts give a cross-check on realized prices. Dividing Jushi's 2025 glass fiber revenue of RMB 18.35 billion by its 3.20 million tonnes of roving and products gives about RMB 5,700 per tonne, and Taishan's RMB 8.9 billion over 1.37 million tonnes about RMB 6,500 per tonne [estimate] [S1] [S3]. Both figures include fabrics, mats and electronic cloth, so they sit well above the commodity roving average and should not be read as a roving quote. Taishan reported a 14% rise in average selling price in 2025 [company] [S3].
Electronic yarn is a different market. G75 electronic yarn averaged RMB 14,250 per tonne at end-June 2026 and RMB 23,450 by mid-September, up 167.4% year on year, and 7628 electronic cloth averaged about RMB 10.2 per meter in August against RMB 4.15 a year earlier, as AI server demand pulled capacity toward low-dielectric and low-expansion products [statistic] [S5]. CGFIA counted RMB 13.38 billion of special electronic glass fiber projects under construction or planned at end-2025, most due in 2027 [statistic] [S1]. A reinforcement buyer feels this indirectly: furnace capacity and capital move toward the higher-margin products.
Supply in 2026 is tight at the margin. Only one new furnace fired in the first half of 2026, Inner Mongolia Tianhao's 150,000-tonne line 3, while Jushi's Tongxiang line 4 and Taishan's F02 line were down for cold repair; Guojin Securities linked the slowdown to producers' capital going into electronic cloth and to the rising cost of platinum for bushings [media] [S4]. Jushi wrote off RMB 373 million of platinum-rhodium alloy loss in 2025 and paid RMB 553 million in cash for platinum, against RMB 202 million in 2024 [company] [S1]. CPIC warns that early-2026 cold repairs could leave the market locally short [company] [S2].
↔ Scroll horizontally to see the full chart and data table.
Source: Sublime China Information as quoted by Guojin Securities (21 Aug 2026) and NetEase (13 Oct 2026). * Back-calculated from the reported +1% year-on-year and +5% quarter-on-quarter changes for Q2 2026 [estimate]. Delivered, VAT inclusive. Points are unevenly spaced.
View the chart data and evidence
| Series | Category | Value | Unit | Evidence / value basis | Reported range | Point note |
|---|---|---|---|---|---|---|
| — | Q2 2025 | 3743 | RMB/t | GetFRP estimate | — | — |
| — | Q1 2026 | 3601 | RMB/t | GetFRP estimate | — | — |
| — | Q2 2026 avg | 3781 | RMB/t | Statistic | — | — |
| — | End-Jun 2026 | 3791 | RMB/t | Statistic | — | — |
| — | 15 Sep 2026 | 3732 | RMB/t | Statistic | — | — |
↔ Scroll horizontally to see the full chart and data table.
Source: Caitong Securities cycle series as quoted by NetEase (13 Oct 2026). A broker composite series, not the SCI 2400 tex roving average in Figure 3; the two are not directly comparable.
View the chart data and evidence
| Series | Category | Value | Unit | Evidence / value basis | Reported range | Point note |
|---|---|---|---|---|---|---|
| — | Dec 2013 | 4896 | RMB/t | Statistic | — | — |
| — | Apr 2015 | 5942 | RMB/t | Statistic | — | — |
| — | Jun 2017 | 4790 | RMB/t | Statistic | — | — |
| — | May 2018 | 5492 | RMB/t | Statistic | — | — |
| — | Nov 2021 | 7008 | RMB/t | Statistic | — | — |
| Driver | 2025–2026 evidence | Effect for a roving buyer |
|---|---|---|
| New furnace capacity | 860 kt added in 2025; one 150 kt line fired in H1 2026 | 2025 supply growth capped prices; 2026 is a light year for new supply |
| Cold repairs | Jushi Tongxiang line 4 (Jan–Jun 2026) and line 5 announced; Taishan F02 | Temporary tightness in specific grades and plants |
| Platinum and rhodium | Jushi platinum cash outlay RMB 553 m in 2025 vs 202 m in 2024; alloy loss RMB 373 m | Raises the capital cost of new bushings and capacity |
| Electronic cloth boom | G75 yarn +167% year on year by Sep 2026 | Capital and furnace time shift away from commodity roving |
| Domestic demand mix | Thermoset reinforcement consumption +22.6% in 2025; H1 2026 wind installations about −25% | Wind yarn demand cooled in 2026 after the 2025 peak |
| Export headwinds | Exports −3.6% in 2025; Jan–Aug 2026 +4.7% to 1.379 Mt | Producers push export volume when home demand slows |
Source: CGFIA via annual reports; Guojin Securities; NetEase industry review. See Sources.
3. E-glass vs E-CR vs high-modulus vs S-glass: which glass type to specify
Glass chemistry sets the modulus ceiling before any sizing or process choice. Traditional E-glass is a calcium aluminoborosilicate with 8–13% boron oxide in Hexcel's reference composition; S-2 Glass is a magnesium aluminosilicate with 64–66% silica, 24–26% alumina and no boron [company] [S21]. Most Chinese direct roving is now boron-free: Jushi describes its E6 as an E-CR glass under ASTM D578, and 3B describes its E-CR rovings the same way under ASTM D578 and ISO 2078 [company] [S6] [S14]. On Jushi's own test basis, standard E-glass has a glass modulus of 74 GPa, E6 81 GPa, E7 89 to 90 GPa, E8 95 GPa and E9 101 GPa, with thermal expansion falling from 6.1 to 4.7 × 10⁻⁶/K and softening point rising from 838 to 970 °C [company] [S7] [S8]. AGY's reference E-glass lists 72 GPa, 2.54 g/cm³, 5.4 × 10⁻⁶/°C expansion and a dielectric constant of 6.1 at 10 GHz, the values most Western design handbooks still assume [company] [S20].
The strand data matter more than the glass data for a buyer because they include the sizing. In epoxy-impregnated strand tests to ASTM D2343, Jushi reports 1,900–2,000 MPa and 73–75 GPa for E-glass, 2,500–2,700 MPa and 81–83 GPa for E6, 2,800–3,000 MPa and 89–91 GPa for E7, and 3,100–3,500 MPa and 95–98 GPa for E8 [company] [S7] [S8]. In epoxy UD laminates at 55% fiber volume the same grades give 49–50 GPa (E7), 51–52 GPa (E8) and 54–55 GPa (E9) tensile modulus [company] [S8]. That 10% laminate gain from E7 to E9 is what lets glass spar caps reach longer blades: CPIC reports its high-modulus pultruded plates in service on blades above 90 m [company] [S2].
Western high-performance glasses sit in the same band. 3B's HiPer-tex W 2020, an R-glass, lists 2,700–2,900 MPa, 86–89 GPa and 3.1–3.3% strain on the strand test and 48 GPa in a 56% UD epoxy laminate [company] [S16]. AGY's S-2 Glass claims 30% higher strength and 15% higher modulus than E-glass at the same fiber volume, a 20% lower dielectric constant, and a 1,056 °C softening point [company] [S19]. CPIC says it developed a 100 GPa ultra-high-modulus wind glass in 2025 that supports blades longer than 110 m [company] [S2]. Chinese tank-furnace high-modulus glass therefore now matches or exceeds the classic S- and R-glass modulus; S-2 keeps an edge in strain to failure and impact work, and it is still produced at much smaller scale.
↔ Scroll horizontally to see the full chart and data table.
Source: Jushi E8 and E9 brochures (ASTM E1876 glass modulus); 3B HiPer-tex W 2020 datasheet (ASTM D2343 strand); Hexcel HexForce handbook (12.5 Msi converted); CPIC 2025 annual report. * Midpoint of the 86–89 GPa range [estimate]. Test bases differ: glass, strand and handbook values are indicative, not interchangeable allowables.
View the chart data and evidence
| Series | Category | Value | Unit | Evidence / value basis | Reported range | Point note |
|---|---|---|---|---|---|---|
| — | E-glass (Jushi reference) | 74 | GPa | Company data | — | — |
| — | E6 / E-CR (Jushi) | 81 | GPa | Company data | — | — |
| — | S-2 Glass (Hexcel table) | 86 | GPa | Company data | — | — |
| — | HiPer-tex R-glass (3B) | 87.5 | GPa | GetFRP estimate | — | — |
| — | E7 (Jushi) | 90 | GPa | Company data | — | — |
| — | E8 (Jushi) | 95 | GPa | Company data | — | — |
| — | CPIC ultra-high-modulus (2025) | 100 | GPa | Company data | — | — |
| — | E9 (Jushi) | 101 | GPa | Company data | — | — |
| Glass type | Typical name or grade | Density (g/cm³) | Modulus (GPa) | Strand strength, ASTM D2343 (MPa) | CTE (10⁻⁶/K) | Where it is used |
|---|---|---|---|---|---|---|
| E-glass (boron-containing) | Jushi E reference; AGY E-glass | 2.54 (AGY) | 72–74 | 1,900–2,000 (Jushi) | 5.4–6.1 | General purpose, electrical laminates |
| E-CR / boron-free | Jushi E6; 3B SE 1010; Advantex | 2.62 | 81 | 2,200–2,700 | 6.0–6.1 | Pultrusion, pipes, tanks, corrosion service |
| High-modulus (wind) | Jushi E7, E8; CPIC TM | 2.60–2.63 | 89–95 | 2,800–3,500 | 5.2–5.5 | Wind spar caps and blade fabrics, pressure pipe |
| Ultra-high-modulus | Jushi E9; CPIC 100 GPa grade | not published | 100–101 | 3,100–3,500 (E9) | 4.7 (E9) | Blades above 100 m, high-stiffness profiles |
| R-glass | 3B HiPer-tex W 2020 | 2.58 | 86–89 | 2,700–2,900 | not published | Wind, ballistic panels, pressure vessels |
| S-2 Glass | AGY S-2 | 2.49 | 86 | 4,585 (fiber, handbook) | 1.6 | Aerospace, armor, radomes, pressure vessels |
Source: Jushi E8 and E9 brochures; 3B SE 1010, HiPer-tex W 2020 datasheets; AGY L-Glass and S-2 datasheets; Hexcel HexForce Fabrics Handbook (US-unit table converted). Strength values on different bases are comparable only in order of magnitude.
4. Tex, filament diameter and sizing: matching roving to UP, VE, epoxy, PU and the process
A glass fiber designation is a compressed specification. Jushi's example code E6 DR 24-2400-386T reads as glass type, direct roving, 24 µm filament diameter, 2400 tex and product code 386T [company] [S41]. Tex is grams per kilometer of strand, so 2400 tex is 2.4 g/m. Filament diameter rises with tex in a direct roving: Johns Manville's StarRov line runs 13 µm at 300 tex, 16 µm at 1,200 to 2,400 tex, 23 µm at 4,800 tex and 32 µm at 9,600 tex, and 3B's epoxy roving moves from 16 µm at 300 tex to 24 µm at 4,800 tex [company] [S17] [S15].
The sizing is where resin compatibility lives. Thomason's review puts the loss on ignition of most commercial glass fiber at 0.5–1.5%, with film formers making up 70–90% of the size solids and chosen to match the intended matrix, and the silane coupling agent bonding the film former to the glass [peer-reviewed] [S22]. Manufacturer catalogs make the matching explicit. Taishan's single-end rovings split into polyester and vinyl ester grades (T910, T912, T930, T931), a multi-resin grade (T921N) and epoxy grades (T920, T920H, T940H, T980), all at an LOI of 0.55% [company] [S18]. AGY sells S-2 roving with binder 365 for polyester, vinyl ester and epoxy, 449 for amine-cured epoxy and urethane, 463 for anhydride epoxy and phenolic, and 933 for high-temperature thermoplastics [company] [S19]. Johns Manville's StarRov 090 covers polyester, vinyl ester, epoxy and polyurethane, while StarRov 086 omits polyurethane [company] [S17].
Jushi's product pages map codes to processes. For pultrusion it lists 312T for sucker rods and high-end profiles, 386T and 386H for general sections and optical cable, 310H for epoxy electrical insulating rods and 332 for polyurethane profiles and spar caps [company] [S9]. For filament winding it lists 162, 162K and 162E for continuous pipe and 308, 308H and 308S for epoxy high-pressure pipe and CNG cylinders, separated by amine or anhydride cure [company] [S11]. For SMC it lists 410J, 440, 442K, 448 and 456 by surface and strength class [company] [S10], and for wind fabrics 320, 380, 390, 396 and 398 split between infusion and prepreg, epoxy and polyester [company] [S12]. A buyer that asks for '2400 tex roving' without the code and resin is asking for any one of these.
Change control is the practical risk. A supplier can keep the tex and glass type and change the sizing, the bushing or the plant, and every one of those can shift wet-out speed, fuzz, interlaminar shear and fatigue. 3B's epoxy roving gives 59 MPa interlaminar shear and 255 MPa fatigue strength at a million fully reversed cycles in a 55% UD laminate [company] [S15]; those are the kinds of values a qualification should freeze against a named code and plant.
↔ Scroll horizontally to see the full diagram.
| Process | Typical form and tex | Filament (µm) | Resin and sizing to request | Example codes |
|---|---|---|---|---|
| Pultrusion | Direct roving 2,400–9,600 tex plus CFM and veil | 16–32 | Silane sizing for UP/VE; separate epoxy or PU grade for those resins | Jushi 312T, 386T, 332 (PU), 310H (epoxy rods); 3B SE 1010; StarRov 090 |
| Filament winding | Direct roving 1,200–4,800 tex | 16–24 | UP/VE for pipe and tanks; epoxy amine or anhydride grade for pressure pipe and cylinders | Jushi 162, 162E, 308H, 308S; Taishan T920, T980 |
| Infusion and NCF fabrics | Direct roving 600–2,400 tex woven or stitched | 16–17 | Epoxy grade for wind; UP grade for marine | Jushi 380, 390, 398; 3B SE 2020, HiPer-tex W 2020 |
| SMC and BMC | Assembled roving 2,400–4,800 tex, chopped in line | not stated | Fast choppability and low static; Class A surface grades | Jushi 410J, 440, 448, 456 (ASMC); 562A (BMC) |
| Hand lay-up and spray | Chopped strand mat by g/m²; woven roving 270–1,600 g/m² | not stated | Emulsion-bound mat for fast wet-out; powder-bound mat for higher strength | Jushi E01, E10, E20 (emulsion); P02, P20 (powder); EWR270–EWR1600 |
| Thermoplastic compounding and LFT | Chopped strand 4.5–12 mm; single-end roving 2,400 tex | 10–16 (chopped) | PA, PP or PBT-specific sizing | StarRov 490, 895; Taishan LFT yarn |
Source: Jushi product pages; Johns Manville product selector; 3B datasheets; Taishan TDS via Revchem; AGY roving datasheet. Mat weights and diameters are catalog ranges; confirm per order.
5. Chopped strand mat, woven roving and multiaxial fabrics from China
Converted products are a large and separately protected part of China's trade. In 2025 China exported 1.123 million tonnes of commercial yarn, 304,000 tonnes of woven fabrics, 226,000 tonnes of chemically bonded mat, 91,000 tonnes of mechanically bonded (needled or stitched) mat and 206,000 tonnes of prepreg and other products [statistic] [S2]. Woven fabrics are the product line hit hardest abroad: the EU's anti-dumping and countervailing duties on woven and stitched glass fabrics run to 69.0% plus 30.7% for the Jushi and Taishan group, which Jushi reports as a combined 99.7% [official] [S35] [S36] [company] [S1].
Chopped strand mat is sold by binder. Jushi's catalog separates emulsion-bound mats (E01, E10, E20), sold on fast wet-out and air release, from powder-bound mats (P02, P20), sold on tensile strength and conformability for large hand lay-up parts [company] [S13]. The Chinese product standard is GB/T 17470-2007 for chopped strand and continuous filament mat [official] [S28]. Woven roving runs from 270 to 1,600 g/m² in Jushi's EWR range, with plain and twill constructions for hand lay-up, compression molding and pipe joints [company] [S13]; its national standard is GB/T 18370-2014, and stitched fabrics fall under GB/T 25040-2010 [official] [S26] [S27].
Wind fabrics are where Chinese weavers and Chinese glass are most integrated. CPIC claims more than 25% of the global market for wind yarn and fabrics and says its high-modulus pultruded plates are used on blades longer than 90 m [company] [S2]. For a buyer of multiaxials the questions are the roving code inside the fabric, the stitching yarn and the areal weight tolerance, because the fabric certificate rarely names the glass grade unless asked.

↔ Scroll horizontally to see the full chart and data table.
Source: China Glass Fiber Industry Association 2025 statistics as reprinted in the China Jushi and CPIC 2025 annual reports. Total exports were 1.950 Mt; the five association categories are shown as reported.
View the chart data and evidence
| Series | Category | Value | Unit | Evidence / value basis | Reported range | Point note |
|---|---|---|---|---|---|---|
| — | Commercial yarn and roving | 1123 | kt | Statistic | — | — |
| — | Woven fabrics | 304 | kt | Statistic | — | — |
| — | Chemically bonded mat | 226 | kt | Statistic | — | — |
| — | Prepreg and other products | 206 | kt | Statistic | — | — |
| — | Mechanically bonded mat | 91 | kt | Statistic | — | — |
6. GB/T, ISO and ASTM standards for glass fiber roving, mat and fabrics
Chinese glass fiber standards are mostly harmonized with ISO test methods, which makes certificate checking easier than buyers expect. The product standard for roving is GB/T 18369-2022, in force since 1 May 2023 and freely downloadable from the national registry [official] [S23]. The yarn test methods, GB/T 7690.1 (linear density), 7690.3 (breaking force and elongation) and 7690.5 (filament diameter), and the reinforcement test methods, GB/T 9914.1 (moisture), 9914.2 (combustible matter, the LOI test) and 9914.3 (mass per unit area), are flagged by the registry as adopted from international standards [official] [S24] [S25]. The EU regulations themselves define the excluded high-LOI rovings by ISO 1887, the LOI method [official] [S30].
Designation and special tests have their own numbers. GB/T 4202-2023 sets Chinese glass fiber product codes [official] [S29]. GB/T 36494-2018 measures roving static, GB/T 26734-2011 sizing solubility, and GB/T 14208.1-2009 the mechanical properties of roving-reinforced resin rods [official] [S26]. In export documentation the familiar Western references are ASTM D578 for glass type classification, ASTM D2343 for impregnated strand tensile tests and ISO 527-5, ISO 14126 and ISO 1172 for UD laminate tension, compression and fiber content, all of which appear in Jushi and 3B datasheets [company] [S7] [S14] [S16].
| Standard | English title or scope | Status | Use in a purchase |
|---|---|---|---|
| GB/T 18369-2022 | Glass fiber roving | In force from 1 May 2023 | Product requirements for direct and assembled roving |
| GB/T 17470-2007 | Glass fiber chopped strand mat and continuous filament mat | In force | Mat requirements |
| GB/T 18370-2014 | Glass fiber woven roving fabric | In force from 1 Oct 2015 | Woven roving requirements |
| GB/T 25040-2010 | Glass fiber stitched fabrics | In force (adopted) | Stitched and multiaxial fabrics |
| GB/T 4202-2023 | Glass fiber product codes | In force from 1 Jun 2024 | Reading Chinese designations |
| GB/T 7690.1 / .3 / .5-2013 | Reinforcements, yarn test methods: linear density; breaking force and elongation; filament diameter | In force (adopted from ISO) | Tex, strand strength and diameter checks |
| GB/T 9914.1 / .2 / .3-2013 | Reinforcement products, test methods: moisture; combustible-matter content; mass per unit area | In force (adopted from ISO) | Moisture, LOI and areal weight checks |
| GB/T 36494-2018; GB/T 26734-2011 | Roving static; sizing solubility | In force | Process-specific checks for chopping and mat binders |
| ASTM D578; ISO 2078 | Glass fiber strand classification; textile glass designation | Referenced in datasheets | E-glass vs E-CR vs R classification |
| ASTM D2343; ISO 527-5; ISO 14126; ISO 1172 | Impregnated strand tension; UD laminate tension and compression; fiber content | Referenced in datasheets | Strand and laminate property claims |
Source: SAMR national standards registry (openstd) entries; Jushi and 3B datasheets; EU Implementing Regulation 2025/2337.
7. EU anti-dumping duty on Chinese glass fiber, US tariffs and other trade measures
The EU has protected its glass fiber industry since 2011 and tightened the measures in 2025 and 2026. After an interim review requested by the European glass fiber producers' association, the anti-dumping duty on Chinese continuous filament glass fiber products (chopped strands up to 50 mm, rovings with LOI up to 3%, and mats, CN 7019 11 00, ex 7019 12 00, 7019 14 00 and 7019 15 00) became 23.0% for the CNBM group (Jushi and Taishan), 17.2% for Jiangsu Changhai, 20.5% for CPIC and 23.0% for all others from 26 November 2025 [official] [S30]. The countervailing duty on the same products was reset at 10.2%, 5.8% and 9.7% respectively [official] [S31]. The Commission estimated Chinese overcapacity at more than 1 million tonnes, possibly above 2 million [official] [S30].
The overseas plants are now covered too. From 15 April 2026 the EU levies anti-dumping duty of 11.8% on CPIC Abahsain Fiberglass in Bahrain, 11.0% on Jushi Egypt and 15.3–25.4% on two Thai producers, with the scope corrected in June 2026 to include rovings and mats as well as chopped strands [official] [S32] [S33]. A countervailing duty of 13.1% on Egyptian glass fiber was renewed in September 2026 [official] [S34]. Fabrics carry separate measures: 34.0–69.0% anti-dumping duty for China and 33.1% for Egypt, extended to imports consigned from Morocco and Türkiye, plus 17.0–30.7% countervailing duty for China and 10.9% for Egypt [official] [S35] [S36].
In the United States, rovings (HTS 7019.12) carry 4.8% MFN duty, chopped strands 4.9%, mats 4.3% and woven fabrics 6.0–7.3% [official] [S37]. All these lines sit on the Section 301 list subject to an additional 25% under heading 9903.88.03, and heading 9903.05.31 adds a further 12.5% on Chinese products in the 2026 schedule [official] [S38]. There is no US anti-dumping order on glass fiber itself; the only recent US case on a glass-fiber product is fiberglass door panels, with final dumping margins of 41.82–147.85% and subsidy rates of 58.50–186.46% announced in June 2026 [official] [S39]. Jushi also reports 35.75% Turkish anti-dumping duty on Chinese roving, a proposed 40–50% Indian duty pending finance-ministry approval, a Brazilian investigation due to close by February 2027, and China's cut of the export VAT rebate on most glass fiber from 13% to 9% in November 2024 [company] [S1].

| Market and product | Measure | Rate | Legal basis | Applies from |
|---|---|---|---|---|
| EU, rovings, chopped strands, mats from China | Anti-dumping | CNBM group 23.0%; Jiangsu Changhai 17.2%; CPIC 20.5%; others 23.0% | Reg. (EU) 2025/2337 | 26 Nov 2025 |
| EU, same products from China | Countervailing | CNBM 10.2%; Changhai 5.8%; CPIC 9.7%; others 10.2% | Reg. (EU) 2025/2328 | 26 Nov 2025 |
| EU, same products from Bahrain, Egypt, Thailand | Anti-dumping | CPIC Bahrain 11.8%; Jushi Egypt 11.0%; Thailand 15.3–25.4% | Regs. (EU) 2026/831 and 2026/1371 | 15 Apr 2026 |
| EU, same products from Egypt | Countervailing (expiry review) | 13.1% | Reg. (EU) 2026/2107 | 24 Sep 2026 |
| EU, woven and stitched fabrics from China | Anti-dumping (expiry review) | Jushi and Taishan group 69.0%; PGTEX 37.6%; Annex II firms 34.0%; others 69.0% | Reg. (EU) 2026/1203 | 10 Jun 2026 |
| EU, same fabrics from China | Countervailing (expiry review) | Jushi and Taishan group 30.7%; PGTEX 17.0%; Annex I firms 24.8%; others 30.7% | Reg. (EU) 2026/1928 | 11 Aug 2026 |
| US, rovings 7019.12 | MFN + Section 301 + China surcharge | 4.8% + 25% + 12.5% | HTSUS 2026 rev. 22; 9903.88.03; 9903.05.31 | in force |
| US, fabrics 7019.61–7019.69 | MFN + Section 301 + China surcharge | 6.0–7.3% + 25% + 12.5% | HTSUS 2026 rev. 22 | in force |
| Türkiye, roving and mat from China | Anti-dumping | 35.75% | Reported by Jushi | since 18 Oct 2022 |
| India, roving and mat from China | Proposed anti-dumping | 40–50% | DGTR final finding, July 2025 (reported by Jushi) | pending approval |
Source: EUR-Lex Official Journal texts; USITC HTS; China Jushi 2025 annual report. Verify the live rate and the TARIC additional code on the invoice before quoting a landed price.
8. Quality risks with Chinese glass fiber and the acceptance tests that catch them
Most quality failures with Chinese glass fiber are identity failures, not chemistry failures. The common ones are a medium-alkali (C-glass) or generic E-glass roving delivered against an E-CR order, a sizing for polyester shipped into an epoxy or polyurethane line, lots from two furnaces mixed on one pallet, a trader relabeling a mill product, and moisture pickup in humid sea freight. Jushi's own report notes that medium-alkali yarn is still produced in China for traditional markets [company] [S1]. In the EU there is also a customs risk: individual duty rates apply only if the invoice carries the producer declaration and TARIC additional code required by the regulation; otherwise the 'all other imports' rate is charged [official] [S32].
Acceptance testing is cheap compared with a failed run. The incoming checks are linear density, LOI, moisture, filament diameter and strand tensile strength, each against values written into the purchase order. Published reference values give the scale: 3B's E-CR roving lists 0.40% size solids and a 0.20% maximum moisture, HiPer-tex 0.4–0.6% sizing, Taishan's rovings 0.55% LOI, and Thomason's review a 0.5–1.5% LOI range for commercial products [company] [S14] [S16] [S18] [peer-reviewed] [S22]. For strength, an E-CR roving should reach 2,200–2,700 MPa in an ASTM D2343 strand test and a high-modulus wind roving 2,800–3,500 MPa [company] [S14] [S7].
The laminate check closes the loop. A UD epoxy laminate at 55% fiber volume should give about 44 GPa and 980 MPa with E-CR roving, 49–52 GPa with E7 or E8, and 54–55 GPa with E9; Jushi's acid-immersion data show boron-free grades retaining 99.6–99.9% of strength after 24 hours in 10% HCl against 81.6% for standard E-glass, which is a quick screen for a mislabeled grade [company] [S15] [S8]. Retain samples from each lot, and ask for the plant, furnace and bushing line on the certificate so that a later deviation can be traced.
| Property | Method | Reference value from datasheets | What a failure usually means |
|---|---|---|---|
| Linear density (tex) | ISO 1889 / GB/T 7690.1 | Nominal tex on the code; tolerance must be written into the order | Wrong product, bushing wear or mixed lots |
| Loss on ignition (size content) | ISO 1887 / GB/T 9914.2 | 0.40% (3B E-CR); 0.4–0.6% (HiPer-tex); 0.55% (Taishan); 0.5–1.5% typical | Sizing change or wrong grade for the resin |
| Moisture | ISO 3344 / GB/T 9914.1 | 0.20% maximum (3B E-CR) | Poor storage or humid transit; risk of voids and poor cure |
| Filament diameter | ISO 1888 / GB/T 7690.5 | 13–24 µm (Taishan); 16–24 µm (3B) | Different bushing or product than ordered |
| Strand tensile strength and modulus | ASTM D2343 / GB/T 7690.3 | E-CR 2,200–2,700 MPa, 81 GPa; E8 3,100–3,500 MPa, 95–98 GPa | Wrong glass type or damaged strand |
| UD laminate tension | ISO 527-5 at stated Vf (ISO 1172) | E-CR 980 MPa, 44 GPa at Vf 55%; E9 1,380–1,500 MPa, 54–55 GPa | Poor fiber-resin compatibility |
| Acid resistance screen | 24 h in 10% HCl at 23 °C | Boron-free grades 99.6–99.9% retention vs 81.6% for E-glass (Jushi) | Boron-containing glass delivered as E-CR |
| Mass per unit area (mats, fabrics) | ISO 3374 / GB/T 9914.3 | Nominal g/m² on the order | Uneven chopping or stitching |
Source: Jushi E8 and E9 brochures; 3B SE 1010, SE 2020 and HiPer-tex datasheets; Taishan TDS via Revchem; Thomason (2019); SAMR registry for GB/T numbers.
9. Where Chinese glass fiber leads, and where it still lags
China leads on scale, furnace technology and high-modulus wind glass. Jushi claims leadership in large tank-furnace design, bushing design, oxy-fuel combustion, sizing and glass formulation [company] [S1], and the modulus ladder from E6 to E9 shows the result. Taishan has built five low-dielectric and low-expansion special fiber lines and sold 19.17 million meters of special fiber cloth in 2025, certified by leading domestic and overseas customers [company] [S3]. Chinese groups also produced 721,000 tonnes of yarn in overseas bases in 2025, up 8.6%, a direct response to trade measures [statistic] [S2].
The lag is in the highest-value niches. China imported only 104,100 tonnes of glass fiber and products in 2025 but paid USD 1.191 billion for them, up 32.9%, with thermoplastic chopped strand the largest import line [statistic] [S1] [S2]. That is an average of about USD 11,400 per tonne against about USD 1,460 per tonne for exports [estimate] [S1]. The gap says that some specialty sizings, ultra-fine yarns and qualified aerospace grades still come from abroad; it also says that a Chinese commodity roving competes on cost, while a Chinese specialty grade must be qualified like any new supplier.
↔ Scroll horizontally to see the full chart and data table.
Source: GetFRP calculation from CGFIA trade data in the Jushi and CPIC 2025 annual reports. * Value divided by volume [estimate]. Product mix differs sharply between the two flows.
View the chart data and evidence
| Series | Category | Value | Unit | Evidence / value basis | Reported range | Point note |
|---|---|---|---|---|---|---|
| — | Imports (104.1 kt, USD 1.191 bn) | 11441 | USD/t | GetFRP estimate | — | — |
| — | Exports (1,949.6 kt, USD 2.852 bn) | 1463 | USD/t | GetFRP estimate | — | — |
10. RFQ checklist for glass fiber roving, mat and fabrics from China
A good glass fiber RFQ names the product precisely enough that two suppliers quote the same thing, and states the evidence that will decide acceptance. The list below converts this report into requirements with values. It assumes a thermoset buyer; for thermoplastic compounding replace the resin and test items with the compounder's own.
- 1. Glass type: state E-CR (boron-free, ASTM D578) or a named high-modulus grade such as E7, E8 or E9, and prohibit substitution with boron-containing E-glass or medium-alkali glass.
- 2. Product code and plant: name the manufacturer code (for example 386T, 332, 308H), the producing plant and, for EU imports, the producer's TARIC additional code; require 60 days' written notice of any change in sizing, plant or bushing line.
- 3. Tex and filament diameter: for example 2400 tex at 17 or 24 µm for pultrusion, with the tolerance band written in the order and tested per ISO 1889 and ISO 1888.
- 4. Resin system: state UP, VE, epoxy (with amine or anhydride cure) or PU, and the process (pultrusion, winding, infusion, SMC), so the sizing matches.
- 5. Size content and moisture: specify the LOI target and band per ISO 1887 (the rovings cited in this report sit at 0.40–0.60%) and moisture at or below 0.20% per ISO 3344 at delivery.
- 6. Strand properties: require an ASTM D2343 report per lot, with at least 2,200 MPa and 80 GPa for E-CR or 2,800 MPa and 89 GPa for E7-class wind roving.
- 7. Laminate evidence: for structural or wind use, a UD laminate report per ISO 527-5 and ISO 14126 at a stated fiber volume (55–60%), resin and cure.
- 8. Mats and fabrics: areal weight and tolerance per ISO 3374, binder type (emulsion or powder) for CSM, roving code inside every fabric, stitching yarn and fiber orientations.
- 9. Packaging and storage: bobbin weight, pallet pattern, stretch wrap and desiccant for sea freight, and acclimatization for 24 hours before use as 3B recommends for its rovings.
- 10. Commercial terms: quote with HS code, Incoterm, tax basis (Chinese domestic price indexes are VAT-inclusive; export quotes are not) and the duty stack at destination, and price over a fixed index window rather than a single spot quote.
How to read the evidence tags
Statistic: association, customs or price-agency data. Company: annual reports, datasheets and company statements. Official: regulations, tariff schedules and standards registries. Peer-reviewed: journal papers. Media: broker and press reports. Estimate: GetFRP calculations, always with inputs shown. Figures from different series are never added together.
Frequently asked questions
Who are the largest glass fiber manufacturers in China?
China Jushi, Taishan Fiberglass (Sinoma Science and Technology) and Chongqing Polycomp International (CPIC). In 2025 they sold 3.20, 1.37 and 1.18 million tonnes of glass fiber and products respectively, and together hold about 70% of Chinese capacity. Shandong Fiberglass is the next large tank-furnace producer.
How much does fiberglass roving cost in China in 2026?
Standard 2400 tex E-glass direct roving averaged RMB 3,730–3,790 per tonne, delivered and VAT inclusive, between June and mid-September 2026 according to Sublime China Information, about 3–6% above a year earlier. High-modulus wind roving, thermoplastic chopped strand and fabrics cost more; exports exclude VAT and add freight and duty.
What is the difference between E-glass and E-CR (E6) glass fiber?
E-CR is boron-free and more acid-resistant. Jushi's data show E6 with an 81 GPa glass modulus against 74 GPa for its reference E-glass, and 99.6–99.9% strength retention after 24 hours in 10% HCl against 81.6% for E-glass. Most Chinese direct roving sold for pultrusion and pipe is now E-CR type.
What does 2400 tex mean, and which tex is used for pultrusion?
Tex is grams per kilometer, so 2400 tex roving weighs 2.4 g per meter. Pultrusion uses 2,400 to 9,600 tex direct roving with 16–32 µm filaments, filament winding 1,200 to 4,800 tex, and fabrics 600 to 2,400 tex. The code must also name the sizing for the resin.
What is the EU anti-dumping duty on Chinese glass fiber?
Since 26 November 2025, 23.0% for the Jushi and Taishan group, 20.5% for CPIC, 17.2% for Jiangsu Changhai and 23.0% for others, plus a countervailing duty of 5.8–10.2%. Woven and stitched glass fabrics carry 34.0–69.0% anti-dumping duty plus 17.0–30.7% countervailing duty.
Is there a US anti-dumping duty on Chinese fiberglass roving?
No anti-dumping order covers glass fiber roving. Rovings under HTS 7019.12 pay 4.8% MFN duty plus 25% Section 301 duty and a 12.5% China surcharge in the 2026 schedule. The US case on fiberglass door panels covers finished doors, not reinforcement.
Is Chinese high-modulus glass fiber as good as Western grades?
On published data, yes for modulus: Jushi E8 and E9 list 95 and 101 GPa against 86–89 GPa for 3B HiPer-tex and about 86 GPa for S-2 Glass. S-2 still leads on strain to failure. The deciding evidence is a laminate test with your resin, not the brochure.
Which tests should I run on incoming glass fiber?
Linear density (ISO 1889), LOI (ISO 1887), moisture (ISO 3344, at or below about 0.20%), filament diameter (ISO 1888) and an impregnated strand tensile test (ASTM D2343). For structural parts add a UD laminate test per ISO 527-5 at a stated fiber volume.
Sources and scope
Figures were cross-checked against primary documents where available; secondary citations are marked in each scope note. Company figures are reported as disclosed by the companies themselves. This note is an independent market assessment and not investment advice.
- [S1]China Jushi Co., Ltd., 2025 annual report (SSE 600176), published 20 March 2026
CGFIA 2025 statistics (yarn 8.43 Mt, yarn by type, consumption, exports 1.9496 Mt and USD 2.852 bn, imports 104.1 kt and USD 1.191 bn, special e-glass projects RMB 13.38 bn); Jushi sales 3.2026 Mt, revenue, margins, bases, projects; concentration statements; platinum-rhodium accounting; trade measures in the US, EU, Türkiye, India and Brazil; VAT rebate cut.
- [S2]Chongqing Polycomp International (CPIC), 2025 annual report (SZSE 301526), published 23 April 2026
Tank-furnace yarn 8.12 Mt; 860 kt new capacity from 10 furnaces; exports by product; overseas-base output 721 kt; industry profit RMB 11 bn; CPIC sales 1,176,994 t and revenue RMB 8.658 bn; wind share above 25%; 100 GPa glass; cold-repair warning.
- [S3]Sinoma Science and Technology, 2025 annual report (SZSE 002080), published 20 March 2026
Taishan Fiberglass: 1.37 Mt sold, capacity above 1.7 Mt/yr, revenue RMB 8.9 bn, average price +14%, yarn and product margins, five low-Dk and low-CTE lines, 19.17 million meters of special fiber cloth.
- [S4]Guojin Securities, China Jushi H1 2026 results note (21 August 2026)
SCI Q2 2026 roving average RMB 3,781/t; Jushi H1 roving sales 1.7004 Mt; one new furnace and two cold repairs in H1 2026; 7628 cloth Q1 average. Broker report citing price-agency data.
- [S5]NetEase industry review of the glass fiber cycle citing Sublime China Information and CGFIA (13 October 2026)
2400 tex roving averages at end-June and mid-September 2026; G75 yarn and 7628 cloth prices; mid-2026 capacity 9.3 Mt with 8.65 Mt in production; H1 2026 output and demand; Caitong price-cycle points. Secondary summary of agency data.
- [S6]China Jushi, R&D core: E6, E7, E8 and E9 glass
E6 as E-CR glass under ASTM D578; E7, E8 and E9 positioning; E9 modulus above 100 GPa. Company statements.
- [S7]China Jushi, E8 high-modulus glass fiber brochure
E6, E7, E8 density, CTE, softening point, glass modulus, dielectric constant; ASTM D2343 strand data; UD infusion laminate data at about 54% Vf. Company data, marked preliminary.
- [S8]China Jushi, E9 ultra-high-modulus glass fiber brochure
E, E7, E8, E9 glass modulus (74/90/95/101 GPa), CTE, softening point; strand and UD laminate data at 55% Vf; chemical retention tests. Company data.
- [S9]China Jushi, fiberglass products for continuous profiles
Pultrusion codes 276, 310H, 312, 312T, 316H, 332, 386T, 386H and panel codes with applications.
- [S10]China Jushi, fiberglass products for compression molding
SMC codes 410J, 440, 440A, 442K, 448, 456, 458 and BMC codes 552B, 558, 562A.
- [S11]China Jushi, fiberglass products for pipes
Filament-winding codes 162, 162K, 162E, 306B, 308, 308H, 308S, 310S, 386T, 386H with resin and cure compatibility.
- [S12]China Jushi, fiberglass products for fabrics and mats
Wind fabric roving codes 320, 380, 386T, 390, 396, 398 by process and resin; mat and lightweight fabric rovings.
- [S13]China Jushi, fiberglass mats and woven rovings
Emulsion CSM E01, E10, E20; powder CSM P02, P20; woven roving EWR270 to EWR1600 in plain and twill.
- [S14]3B, SE 1010 direct roving datasheet
E-CR glass per ASTM D578 and ISO 2078; 600–4,800 tex at 17 and 24 µm; size solids 0.40%; moisture max 0.20%; strand 2,200–2,500 MPa and 81 GPa; density 2.62.
- [S15]3B, SE 2020 direct roving for epoxy resins datasheet
Tex and filament ladder; CTE 6.1; UD laminate at Vf 55%: 980 MPa, 44 GPa, 61 MPa transverse, 59 MPa ILSS, fatigue 255 MPa at 10⁶ cycles R = −1.
- [S16]3B, HiPer-tex W 2020 rovings datasheet
R-glass classification; strand 2,700–2,900 MPa, 86–89 GPa, 3.1–3.3% strain; density 2.58; sizing 0.4–0.6%; UD laminate 1,280 MPa and 48 GPa at Vf 56%; storage advice.
- [S17]Johns Manville, reinforcement fiberglass product selector guide
StarRov tex versus filament diameter; resin compatibility of sizings 090 (UP/VE/epoxy/PU) and 086; process mapping.
- [S18]Taishan Fiberglass, E-glass single-end roving technical data sheet (distributor copy, Revchem)
Grades T910 to T980 with resin compatibility (UP/VE, multi-resin, epoxy), 13–24 µm, LOI 0.55%, silane sizing. Distributor-hosted manufacturer datasheet.
- [S19]AGY, S2 Glass fiber rovings product information (2025)
Strength and modulus gains versus E-glass at the same Vf, 20% lower dielectric constant, softening point; binder codes and resin compatibility.
- [S20]AGY, L-Glass product information
E-glass reference values: dielectric constant 6.1 and loss tangent 0.004 at 10 GHz, density 2.54, CTE 54 × 10⁻⁷/°C, modulus 72 GPa.
- [S21]Hexcel, HexForce technical fabrics handbook
E-glass and S-2 Glass compositions and US-unit fiber property table (converted to SI by GetFRP). The handbook's metric table contains inconsistencies and was not used.
- [S22]Thomason, Glass fibre sizing: a review, Composites Part A 127 (2019) 105619, open-access version
LOI range 0.5–1.5% for commercial products; film formers 70–90% of size solids; role of silane coupling agents. Peer-reviewed.
- [S23]SAMR national standards registry: GB/T 18369-2022 Glass fiber roving
Issue 14 October 2022, in force 1 May 2023; full text downloadable.
- [S24]SAMR national standards registry: GB/T 7690.1-2013 Reinforcements, test method for yarns, linear density
Adopted from an international standard; in force 1 August 2014. The GB/T 7690 series also covers breaking force and filament diameter.
- [S25]SAMR national standards registry: GB/T 9914.2-2013 Combustible-matter content for glass fiber
LOI test, adopted from an international standard; companion parts 9914.1 (moisture) and 9914.3 (mass per unit area).
- [S26]SAMR national standards registry: search results for glass fiber roving standards
GB/T 18370-2014 woven roving fabric, GB/T 36494-2018 roving static, GB/T 26734-2011 sizing solubility, GB/T 14208.1-2009 roving-reinforced rods.
- [S27]SAMR national standards registry: search results for glass fiber stitched fabrics
GB/T 25040-2010 glass fiber stitched fabrics (adopted).
- [S28]SAMR national standards registry: search results for chopped strand mat
GB/T 17470-2007 chopped strand mat and continuous filament mat.
- [S29]SAMR national standards registry: search results for glass fiber product codes
GB/T 4202-2023 glass fiber product codes, in force 1 June 2024.
- [S30]Commission Implementing Regulation (EU) 2025/2337 amending the anti-dumping duty on continuous filament glass fibre products from China
Product scope and CN codes; AD rates 23.0%, 17.2%, 20.5%, 23.0%; measure history since 2011; overcapacity findings; ISO 1887 LOI threshold.
- [S31]Commission Implementing Regulation (EU) 2025/2328 amending the countervailing duty on continuous glass fibre products from China
CVD rates 10.2% (CNBM), 5.8% (Jiangsu Changhai), 9.7% (CPIC), 10.2% others after a partial interim review limited to injury.
- [S32]Commission Implementing Regulation (EU) 2026/831, anti-dumping duty on glass fibre products from Bahrain, Egypt and Thailand
Rates 11.8% (CPIC Abahsain, Bahrain), 11.0% (Jushi Egypt), 15.3–25.4% (Thailand); invoice declaration requirement for individual rates.
- [S33]Commission Implementing Regulation (EU) 2026/1371 correcting Regulation 2026/831
Extends the corrected scope to rovings and mats as well as chopped strands, applying from 15 April 2026.
- [S34]Commission Implementing Regulation (EU) 2026/2107, countervailing duty on glass fibre products from Egypt (expiry review)
CVD of 13.1% on Jushi Egypt and all other Egyptian imports, renewed 22 September 2026.
- [S35]Commission Implementing Regulation (EU) 2026/1203, anti-dumping duty on woven and stitched glass fibre fabrics from China and Egypt (expiry review)
AD rates 69.0%, 37.6%, 34.0% for China and 33.1% for Egypt; extension to Morocco and Türkiye consignments; CN scope.
- [S36]Commission Implementing Regulation (EU) 2026/1928, countervailing duty on woven and stitched glass fibre fabrics from China and Egypt (expiry review)
CVD rates 30.7%, 17.0%, 24.8% for China and 10.9% for Egypt, from August 2026.
- [S37]USITC, Harmonized Tariff Schedule search, heading 7019
General (MFN) rates for 7019.11 (4.9%), 7019.12 (4.8%), 7019.14 and .15 (4.3%), fabrics 7019.61 to 7019.69 (6.0–7.3%).
- [S38]USITC, HTSUS chapter 99, 2026 revision 22
US note 20(f) listing 7019 lines under heading 9903.88.03 (25%); heading 9903.05.31 adding 12.5% on products of China under US note 52.
- [S39]US International Trade Administration, final determinations in the AD and CVD investigations of fiberglass door panels from China (June 2026)
Dumping margins 41.82–147.85%; subsidy rates 58.50–186.46%; finished-product case, not reinforcement.
- [S40]Owens Corning completes sale of glass reinforcements business to Praana Group (1 May 2026)
Completion date and USD 645 million enterprise value.
- [S41]China Jushi, product code explanation for direct roving
Code structure E6 DR 24-2400-386T: glass type, direct roving, filament diameter, tex, product code.
Image provenance and usage terms appear in each caption; see image credits. Submit a source correction.



