Jiangsu Aocheng Composite Materials Technology is a source-reviewed supplier profile for carbon fiber products, with every search topic tied to company-published product or process evidence and separated from buyer-side verification requirements.
Series-production supplier of automotive carbon-fiber composite structural parts. Customer base includes Chinese EV OEMs (NIO, Chery, SAIC) and tier-one programs across HP-RTM and compression molding.
The reviewed product and process scope makes this supplier relevant to buyer searches for carbon fiber products. These phrases describe products or processes supported by the cited public scope; they do not expand the supplier's catalog or replace technical qualification.
Is this your business?
Register or sign in to claim your company, update this public profile and respond to buyer inquiries.
This procurement profile is built for engineering and procurement teams comparing a finished FRP or composite component against a controlled drawing, service condition and inspection plan. It organizes Jiangsu Aocheng Composite Materials Technology Co., Ltd.'s published products, processes, certificate references and official sources around the primary topic “Jiangsu Aocheng Composite Materials Technology Carbon Fiber Automotive Parts.” The objective is to help a buyer decide whether to open a controlled RFQ, not to turn a broad company catalog into an unsupported approval.
Jiangsu Aocheng Composite Materials Technology Co., Ltd. currently lists 3 product or service groups and 3 manufacturing or support capabilities in this reviewed record. The public scope indicates what to investigate, while the buyer remains responsible for drawings, design calculations, standards, current certificates, sample approval and order-specific commercial confirmation. Claims below are attributed to the attached source set unless GetFRP explicitly labels them as qualification guidance.
Series-production supplier of automotive carbon-fiber composite structural parts. Customer base includes Chinese EV OEMs (NIO, Chery, SAIC) and tier-one programs across HP-RTM and compression molding.
Evaluate Jiangsu Aocheng Composite Materials Technology Co., Ltd. as a potential composite product manufacturer for carbon fiber products, verify the public evidence and prepare a comparable RFQ.
Jiangsu Aocheng Composite Materials Technology Co., Ltd. includes this product in its published supply scope. Treat that listing as a starting point: request the current datasheet or drawing, material and construction, available grades or dimensions, guaranteed properties, production site, quotation revision and evidence that represents the exact item offered.
For EV battery enclosures, buyers should convert the catalog description into an acceptance specification. Confirm standard and custom options, raw-material system, critical tolerances, surface or finish, test basis, sample route, MOQ, lead time and packing. Any alternative proposed by Jiangsu Aocheng Composite Materials Technology Co., Ltd. should be identified explicitly rather than treated as automatically equivalent.
This product broadens the supplier's public portfolio, but GetFRP does not infer approval from a product name alone. Ask Jiangsu Aocheng Composite Materials Technology Co., Ltd. for the grade or model designation, manufacturing route, current technical file, production and test location, batch traceability and the limits that apply to published performance values.
Jiangsu Aocheng Composite Materials Technology Co., Ltd. publishes HP-RTM as part of its capability scope. Buyers should ask which site and equipment perform the work, the practical size or material limits, the normal control records and whether the proposed order uses the same route. Subcontracted stages should be visible in the quality plan.
The relevance of SMC compression molding depends on the requested product and acceptance criteria. During qualification, request a process flow, critical control points, inspection or test method, operator or equipment qualification where applicable, nonconformance handling and a recent example that represents the offered production route.
For sourcing purposes, Thermoplastic forming is a capability signal rather than independent verification. Confirm capacity, tooling or fixture availability, setup and changeover assumptions, lot definition, sample approval and traceability. The quotation should identify any limitation that could affect geometry, performance, appearance or delivery.
These are sourcing contexts suggested by the published product scope, not confirmed project references. Validate the exact application, design basis and evidence in the RFQ.
Jiangsu Aocheng Composite Materials Technology Co., Ltd.'s reinforcement range can be screened for laminating, pultrusion, winding, molding or conversion programs. Buyers should confirm grade, sizing, architecture, width, tex or areal weight, package, splice and moisture limits, then run a representative processing trial before approving the material for repeat production.
Jiangsu Aocheng Composite Materials Technology Co., Ltd.'s tooling scope can be considered for new or replacement production tools. Buyers should release controlled product and interface drawings, material and process assumptions, critical datums, tool material and treatment, heating or flow requirements, trial conditions, acceptance measurements, ownership, maintenance and protected transport.
Jiangsu Aocheng Composite Materials Technology Co., Ltd.'s product references indicate a possible fit for transport applications. Qualification should address part revision, material and process, appearance class, dimensional capability, inserts and secondary operations, validation plan, change control, annual volume, service-part obligations and packaging that prevents cosmetic or structural damage.
Composite products that look similar can use different reinforcement orientations, resin systems, fillers, veils and cure schedules. A useful comparison therefore records the construction behind each quoted property and separates typical catalog values from guaranteed acceptance values. If a supplier proposes an alternative construction, the deviation should be visible in the quotation and supported by a new technical review rather than accepted as an equivalent by name alone.
Jiangsu Aocheng Composite Materials Technology Co., Ltd. does not yet have a complete official source set attached to this profile. The page can support discovery, but buyers should not rely on it for approval until the legal identity, official website and product evidence are documented.
The profile lists 3 company-published certification or test references. A listing is not the same as validation: request the complete current document, issuer, legal holder, production site, product and grade scope, standard edition, report specimen and validity date before citing it in a project or purchase order.
GetFRP last recorded a public-source review date of not recorded. Public websites and catalogs can change after review, so commercial decisions should use newly downloaded files and direct supplier confirmation. GetFRP's public or claimed status describes profile ownership and identity controls; it does not certify every product statement or predict order performance.
Official product catalogs, web directories and technical guides published by the supplier.
No eCatalog has been published yet.
Jiangsu Aosheng Composite Materials Technology Co., Ltd. is a Suzhou-based carbon-composite company whose current corporate website and 2026 China Composites Expo listing support carbon-fiber woven and hybrid fabrics, prepreg, wind-blade pultruded plate and composite application development. The official site also presents automotive, sports, hydrogen, aviation and overseas footprints under the Aosheng group. GetFRP therefore assigns measured-demand phrases such as carbon fiber fabric, carbon fiber plate, pultruded, resin infusion and vacuum infusion only where a published product or manufacturing route supports them. Fishing rods may be an end use of prepreg, but they are not listed here as an Aosheng finished product. Likewise, automotive parts, sports products and hydrogen cylinders are marked as group-sector inquiries rather than automatically attributed to the Jiangsu parent factory. Buyers must confirm the exact legal entity, production site and specification behind a quotation. Awards, customer relationships, capacity, CNAS, patent and standards-participation statements on the website remain company claims, not GetFRP verification.
Jiangsu Changhai Composite Materials Holding Co., Ltd. is a Changzhou supplier of glass-fiber reinforcement and thermoplastic composite materials. Its current official catalog and the 2026 China Composites Expo directory support roving, chopped strands, chopped strand mat, surface and continuous mat, woven roving, biaxial and stitched combinations, mesh, LFT reinforcement, CFRT tape and glass-reinforced thermoplastic panels. GetFRP assigns measured-demand phrases such as chopped strand mat, fiberglass cloth, fiberglass mat, fiberglass chopped strand mat and fiberglass panels only to these published products. The thermoplastic honeycomb offer is described as a core with continuous-glass-fiber-reinforced CFRT skins, not as a solid fiberglass panel or a claim that every honeycomb grade contains glass. Product-specific roving end uses do not mean Changhai manufactures the customer's finished pipe, SMC part or pultruded profile. The complete current logo was downloaded on 2026-08-26 from the exact CDN asset referenced by the official header, trimmed only to remove transparent canvas, and stored locally by GetFRP. Capacity, market-position and certification statements remain company claims pending certificate- and plant-level verification.
Advanced Technik Composite Corp. (ATCC) is headquartered in Changzhou, Jiangsu. Its official history says the business was established in July 2017 and changed its Chinese legal name from Changzhou Qifu Antai Composite Materials Technology Co., Ltd.—the name still used by the China Composites Expo listing—to on October 20, 2025. The current website focuses the group on aircraft-grade carbon-fiber composite structures for civil-aircraft subcontracting, low-altitude aircraft and high-end industrial applications. It says ATCC fully acquired Germany's COTESA GmbH and EC in 2018 and now operates a six-base, two-center footprint with global sales offices. These history, program, customer, qualification and footprint statements are company- or organizer-published and have not been independently verified by GetFRP.